Part 101: HOW TO: P2V Ubuntu Linux – Sync Changes Using VMware vCenter Converter Standalone 9.0

Welcome back to Hancock’s VMware Half Hour!

This episode has been an absolute marathon — over 60 hours of preparation and 22 hours of raw footage, all edited down into a tight 32-minute deep dive. Why? Because VMware vCenter Converter Standalone 9.0 simply refused to behave long enough to demo a single clean sequence.

But I was determined to prove that Converter 9.0 does still do what it says on the tin… even if it took five days of filming, endless retries, and a lot of video editing magic to get there!

In Part 101, we focus on the new Synchronize Changes capability for Linux P2V conversions, a feature added in Converter 9.0. If you’ve ever battled inconsistent sync jobs, failed helpers, dodgy estimated times, or the infamous 91% stall… this is the guide you've been waiting for.

I walk through everything — the good, the bad, the technical, and the downright ridiculous — and show you how to get a successful, validated P2V sync with matching checksums.

And yes… it really works. Q.E.D. ✔️

📌 What You’ll Learn in Part 101

How to properly configure and execute Synchronize Changes using Converter 9.0
Why the Helper VM can be both essential and problematic
How Converter uses rsync under the hood
What happens at 91% (and why it’s the danger zone!)
How to validate your sync using md5sum
Why each sync creates destination snapshots
How to perform the final cutover with Power Off Source / Power On Destination
A full end-to-end demonstration including checksum verification of a 10GB test file

🔗 Related Videos

Part 100: HOW TO: P2V A Linux Ubuntu PC using VMware vCenter Converter Standalone 9.0 https://youtu.be/PTpApnH8hrA

Part 49. HOW TO: Sync changes when completing a P2V/V2V with VMware vCenter Converter Standalone 6.4 https://www.youtube.com/watch?v=1yCAT_09hjg

⏱️ Chapters
00:00 - Intro
00:09 - Welcome Back to Hancock's VMware Half Hour
00:16 - Part 100 is here - https://youtu.be/PTpApnH8hrA
00:28 - In Part 101 - Sync Changes on Linux
01:30 - Sync Changes on Linux NEW to Converter 9.0
01:40 - Sync changes video for Windows - https://youtu.be/1yCAT_09hjg?si=TVcrdKV2g_1U1Npl
01:54 - No lie, this procedure caused me some issues!
02:08 - Select Convert Machine as per procedure in Part 100
02:58 - To use the Synchronize Changes you need to Select It !
03:10 - You may want to configure the Helper - be warned!
03:43 - Deep dive into technical issues!
05:35 - VMware Converter uses a Rsync job to sync source and destination
07:54 - Don't believe the Estimated Time Remaning!
08:12 - At 91% is where I've observed issues with the change tracker driver!
09:45 - The first seed conversion is completed
10:19 - It took 60 hours, and 22 hours of recorded footage!
11:07 - Ground Hog Day!
13:06 - Summary of Procedure using Sync Changes Method
13:30 - Show Source Linux server via SSH
13:43 - Download 10GB file to test replication
15:25 - 50% technical knowledge, 25% patience and 25% luck to get a successful conversion !
15:35 - Checksum the 10Gb.dat download
15:58 - Md5sum Checksum completed on source Linux machine
16:16 - Select and execute the Synchronization Job
16:21 - Note the errors of failed jobs!!!!
16:39 - Perform final synchronization
17:16 - Remember - There is a Snapshot for every Sync made!
17:36 - It's the Destination Virtual machine not the source!
18:11 - To cut over, you can use the Power Off Source and Power On Destination options
20:55 - Final Syncronization of Changes completed
21:07 - Snapshots being removed or merged on the destination VM
24:16 - Synchronization of Changes P2V Completed successfully
24:28 - Power up destination machine to check the 10Gb.dat file
25:32 - Login to our replicated P2V - new VM
26:27 - md5sum 10Gb.dat on replicated VM
27:28 - SUCESS Matching Chksums !
27:47 - Q.E.D
28:44 - Thank you for watching, don't forget to like, sunscribe and share
29:29 - Secret Reveal next video!

☕ Enjoying the content? Support me with an espresso coffee! 👉 Buy Me an Espresso Coffee! - https://buymeacoffee.com/einsteinagogo
Donate - https://www.paypal.com/paypalme/AndrewHancock
🐝 Want to support British beekeeping? Get RAW PURE honey here! 👉https://meltonbyhoney.com/ Sorry UK only, unless demand increases to international destinations!

🔥 Watch the newest videos in the series:
https://www.youtube.com/playlist?list=PLNnzoLjh3vLQksns6N1kHEVrrr8IoMPde

https://www.youtube.com/playlist?list=PLNnzoLjh3vLQpp7ADrSQsFTlQzhv05pn7
https://www.youtube.com/playlist?list=PLNnzoLjh3vLTM9cHIiaLbMZ8Zq4s9yg8f
https://www.youtube.com/playlist?list=PLNnzoLjh3vLTLYqplGCE8VVBhq073Wh3V
https://www.youtube.com/playlist?list=PLNnzoLjh3vLT5zYeNfJHuRAyeSguEVsdX
https://www.youtube.com/playlist?list=PLNnzoLjh3vLT15Y_noxU-1RXk2sAHdeZk
https://www.youtube.com/playlist?list=PLNnzoLjh3vLQxXGQdH6BdgT0VjgkFHK_U

💡 Follow Hancock’s VMware Half Hour for more:
https://www.youtube.com/@UCaqYL_WmGJohUoM-CAJk-DQ
https://twitter.com/einsteinagogo
https://www.linkedin.com/in/andrewhancock/

Видео Part 101: HOW TO: P2V Ubuntu Linux – Sync Changes Using VMware vCenter Converter Standalone 9.0 канала Hancock's VMware Half Hour