Shop Talk 17 Flycutters & Tool Bits
I wanted to talk about fly cutters since I had the mini pallet still mounted in my mill vise. We'll take one of my largest fly cutters and attempt to get a nice clean cut with good surface finish on the aluminum plate. I'll show one cut using a carbide insert tool, and the second cut I'll grind a piece of high speed and hone to it try and achieve a nice smooth finish.
Видео Shop Talk 17 Flycutters & Tool Bits канала Abom79
Видео Shop Talk 17 Flycutters & Tool Bits канала Abom79
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![How to Set a Flycutter to Machine a Specific Diameter](https://i.ytimg.com/vi/eYZ9ndMs6bY/default.jpg)
![Fly Cutter Comparison](https://i.ytimg.com/vi/0vSeUOJBU8o/default.jpg)
![SNS 165: First Job for the Gator Chuck, Facemilling, Viewer Mail](https://i.ytimg.com/vi/-qoX-gj9NO8/default.jpg)
![Building a Fly Cutter - Part 1](https://i.ytimg.com/vi/JBDNu_ViHlU/default.jpg)
![](https://i.ytimg.com/vi/PaQxR63x5EY/default.jpg)
![Shop Talk 14: Reamers](https://i.ytimg.com/vi/pRc6y5qWSZM/default.jpg)
![How To Sharpen Brazed Carbide - How It Compares To Inserts](https://i.ytimg.com/vi/FLw8Crhxsdc/default.jpg)
![Flycutter Tool Geometry vs. Chipped Parts](https://i.ytimg.com/vi/3LU_tFLZCCU/default.jpg)
![SNS 310: Machining a Cast Iron Prism Straight Edge](https://i.ytimg.com/vi/RhTsGgRxViE/default.jpg)
![A Brief Chat about Carbide Tooling](https://i.ytimg.com/vi/rsFFWYo8ugw/default.jpg)
![SNS 335: 2" Power Tapping with Flexarm GHM-60, Cast Iron Braze Repair](https://i.ytimg.com/vi/OQR32SWkxOg/default.jpg)
![Use of the Fly Cutter on the Milling Machine](https://i.ytimg.com/vi/-sLHcFanDpg/default.jpg)
![Best Fly Cutter Bit](https://i.ytimg.com/vi/m8_RZ2_pGP8/default.jpg)
![Digital Readout! DRO! How to buy, install, and use 'em!](https://i.ytimg.com/vi/DZz8KlzJcEA/default.jpg)
![Building a Mini Pallet Clamp Device for the Milling Machine](https://i.ytimg.com/vi/OQ76RUm-egI/default.jpg)
![Using a Boring Head/Bar in a Drill Press](https://i.ytimg.com/vi/ovD6N_mie3w/default.jpg)
![Making of face milling tool - 200mm diameter - The Fly Cutter × 4](https://i.ytimg.com/vi/juwULJPOSsE/default.jpg)
![Making a Fly Cutter](https://i.ytimg.com/vi/yMfshXTSi9U/default.jpg)
![Building a Fly Cutter - Addendum](https://i.ytimg.com/vi/LQ6MFPZLzII/default.jpg)
![Rotary Table Chuck Mount : Let's make one!](https://i.ytimg.com/vi/1U4fec7dBNc/default.jpg)