Flycutter Tool Geometry vs. Chipped Parts
In this video I'll explain why you may be blowing the edges and corners off your plastic parts when using a flycutter. I'll show you 2 different tool profiles and suggest the better of the 2 for the best results. Take a Look.
Видео Flycutter Tool Geometry vs. Chipped Parts канала Joe Pie
Видео Flycutter Tool Geometry vs. Chipped Parts канала Joe Pie
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Camera and Light tray buying tips
Ruger the english bulldog and his french girlfriend Lola
Machinists...Have you ever seen these micrometers ??
Machining a Shaper Crank Lever Casting - - - 500 Pounds or .5 ounces ?
Miniature Oil Cups for the Headstock
How to Easily Machine a Star on a Rotary Table. Holiday Ornament Maybe ??
A Creative Fix For A Small Problem !! A Mid-Week Quickie
Stuart D10 - Vertical Twin Cylinder Steam Engine - Lets Begin !!
Milling thick stock into thin stock
Stuart D10 - # 14 -- Machining The Eccentric Strap and New Eccentric Sheave
How To Safely Siphon Liquid with A Vacuum Pump - Take a Look !!
Machining a Miniature Lathe - Finishing the Head Stock (b)
Machining an Eccentric Feed Hub and Collar
Mini Milling Machine - Machining The 3 ball Crank Arms
Organize Your Shop and Stop Wasting Time !!
Square Pegs in Round Holes......Say What ??
Stunning Miniature Milling Machine - Check This Out !!
Stuart D10 - # 12 -- Machining the Cross Heads
Machining Long Miniature Keyways, in Small Diameter Shafts.
Miniature Machine Tool Models -- Which One Would You Like to See Next ??
Mini Milling Machine - Mini Cat 40 Spindle ??