【加工動画12】旋盤で4軸加工/ 4-axis machining on a lathe
ダイヤモンド砥石
https://amzn.to/2WTYHak
研磨剤
https://amzn.to/2D3IzvR
旋盤を使ってアルミを17面体のシングルカットに加工しました。
切削によりできた細かな凹凸が回折格子(かいせつこうし)と同様に作用するので見る角度によって虹色に変化します。
正式な加工方法ではありませんが、アイデアの種にしていただけたら幸いです。
セットスクリュー(止めネジ)は治具の持ち替え時のズレ防止程度にお考え下さい。
バイト押さえのボルトで締め付けることで治具が変形してワークを把握しています。
治具の製作工程→https://www.youtube.com/watch?v=US7gLF2s1mQ&t=632s
Thank you for watching.
Using a lathe, aluminum was processed into a single cut of 17 sides.
The fine irregularities created by cutting act like a diffraction grating, so it changes to a rainbow color depending on the viewing angle.
It is not an official processing method, but I hope you can use it as a seed for your ideas.
Please consider the set screw to prevent misalignment when holding the jig.
The work piece is grasped as the jig is deformed by tightening with the bolt for holding the cutting tool.
How to make a jig→https://www.youtube.com/watch?v=US7gLF2s1mQ&t=632s
Видео 【加工動画12】旋盤で4軸加工/ 4-axis machining on a lathe канала Swap lamp-スワップランプ
https://amzn.to/2WTYHak
研磨剤
https://amzn.to/2D3IzvR
旋盤を使ってアルミを17面体のシングルカットに加工しました。
切削によりできた細かな凹凸が回折格子(かいせつこうし)と同様に作用するので見る角度によって虹色に変化します。
正式な加工方法ではありませんが、アイデアの種にしていただけたら幸いです。
セットスクリュー(止めネジ)は治具の持ち替え時のズレ防止程度にお考え下さい。
バイト押さえのボルトで締め付けることで治具が変形してワークを把握しています。
治具の製作工程→https://www.youtube.com/watch?v=US7gLF2s1mQ&t=632s
Thank you for watching.
Using a lathe, aluminum was processed into a single cut of 17 sides.
The fine irregularities created by cutting act like a diffraction grating, so it changes to a rainbow color depending on the viewing angle.
It is not an official processing method, but I hope you can use it as a seed for your ideas.
Please consider the set screw to prevent misalignment when holding the jig.
The work piece is grasped as the jig is deformed by tightening with the bolt for holding the cutting tool.
How to make a jig→https://www.youtube.com/watch?v=US7gLF2s1mQ&t=632s
Видео 【加工動画12】旋盤で4軸加工/ 4-axis machining on a lathe канала Swap lamp-スワップランプ
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
【加工動画16】旋盤で球体/ How to make a sphere on a lathe.Production of Crankshafts in Factory Complete Process || Machining 3 Cylinder Engine CrankshaftMaking a BIG Hydraulic Cylinder Rod & Eye | Part 2【加工動画25】旋盤で六角穴/How to make a hexagonal hole with a lathe.【加工動画13】金属風船/ Metal balloonGear Hobbing Attachment (milling machine) Part 2Tự chế bàn xoay độ máy khoan phay【加工動画14 part2/2】旋盤でチタン加工/Ring made from titanium nutsMachine Shaft From 2000 Lb StockHomemade Lathe Tool Post for a 100+ years old Lathe!!【加工動画08 part1/2】旋盤で歯車/Worm wheel made with lathe【加工動画06】摩擦圧接で魔法の輪/Magic ring by friction welding【加工動画09】旋盤で二重反転ジャイロ/Make a contra-rotating gyroscopeRepair DAMAGED Hydraulic Cylinder for CAT 651 Scraper | Part 1【加工動画18】旋盤でパイプえぐり/ Tube notching on a lathe【加工動画21】旋盤で六角ナット(大)/ How to make big hex nut on a lathe【加工動画04】旋盤で幾何学キューブ/Turner's cube【加工動画07】旋盤で摩擦圧接 コンビの指輪/Bi-Metal Ring made with lathe【加工動画05】旋盤で知恵の輪/ Puzzle ring