DIY Torquemeter - How to measure torque! [Arduino & 3D Printed]

Correction: The power is actually 3.8 W and not 38 W. Ma Bad!

Torque is a very important part of the world around us.
Almost every machine around us uses levers in one way or another so it's important for engineers, designers, and builders, to be able to measure this rotational force.

In a general way, is possible to separate torque into 2 categories:

-Static Torque;

-Dynamic Torque;

Static torque is very easy to measure, so the core theme of this video is how to build a simple and cheap device capable of measuring dynamic torque or torque linked to a rotational speed.

The final result is a device that uses an Arduino, a load cell, some 3D Printed parts, and electrical components
to measure torque.

If you're interested in choosing the theme for my next video, please visit the community tab on my channel.

Software
Arduino IDE: https://www.arduino.cc/en/Main/Software

Code

Code Torquemeter (Hacksterio):https://bit.ly/2Tk1Yii

HX711 (Calibration & Demo):https://bit.ly/2T2LrAk

LCD Shield (Demo):https://bit.ly/2Kkpvsb

3D Models

Thingiverse: https://www.thingiverse.com/thing:3450743

Components

Load Cell(500g):https://bit.ly/2GGBaD1

Amplifier(HX711):https://bit.ly/2nOrBYq

Photointerrupter:https://www.sparkfun.com/products/9299

Breakout Board:https://www.sparkfun.com/products/9322

Music:

Five Card Shuffle by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100227
Artist: http://incompetech.com/

Social Media

Facebook:https://www.facebook.com/thisisintegza

Twitter:https://twitter.com/Integza__

Instagram:https://www.instagram.com/joel8leoj/

Видео DIY Torquemeter - How to measure torque! [Arduino & 3D Printed] канала Integza