Quadruped robot with SG90 servos powered by 6V Ni-MH battery pack
Inspired by Stanford Pupper but using low cost parts (Arduino Nano, 12xSG90 servos, Adafruit servo driver, 6V 2400 mAh Ni-MH battery pack, small ball bearings). 3D printed with PLA on an Anet A8.
Next step is to power the Arduino Nano with a 3.7 V LiPo using a 5V boost converter from Adafruit. And repair the faulty servo on the rear right leg.
Видео Quadruped robot with SG90 servos powered by 6V Ni-MH battery pack канала Frédéric Lopez
Next step is to power the Arduino Nano with a 3.7 V LiPo using a 5V boost converter from Adafruit. And repair the faulty servo on the rear right leg.
Видео Quadruped robot with SG90 servos powered by 6V Ni-MH battery pack канала Frédéric Lopez
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Autoradio et hauts-parleurs pour Citroën AmiAutoradio Citroën AmiGouache portrait painting timelapseQuadruped robot with SG90 servos inspired by Stanford PuppperDelrin worm gear printed on perforated cardboard with the Anet A8Crouch/stand on AAA batteriesCrouch/stand biped robotPlaying soccer12 dof legs with batteries inside12 dof biped powered by 4xAA batteries12 dof legged robot on USB battery controlled via BluetoothCrouching 12 dof legged biped robotMore tests with the 12 dof bipedArduino biped robot with 12 dof legs controlled by UnitySix S90 servos driven by an Arduino Nano with a 16 channel shieldLaser + brosse à dent électrique = Fiber Scanned DisplayUnstructured Lumigraph RenderingPS Move SetupPS Move tracking with the Sony Bloggie 3D on WindowsPS Move + PS Eye tracking with Unity