Queen Size Bed Frame DIY

Get the metal flanges on Amazon:
https://amzn.to/2E9Uk2m

Metal pipe legs:
https://amzn.to/2E9nvSP

https://amzn.to/2TjClLL
Land To House Air Mattress.

In this video I show you how to make a Queen Sized Bed Frame. This is a very sturdy frame made from wood and metal legs. If you are going to be using a foam style mattress without box springs then you can follow along with the cuts that are made in the video. If you are going to use a boxspring then use the alternate cuts to accommodate the extra size of the box springs. I built this bed for $110 but prices may vary depending on where you live. Shopping Big box stores will almost double the cost.

You will need a few materials to complete this project:
9 = 8"x1" Pipes
18 = 1" floor flanges
7 = 2x6x96 boards
6 to 12 = 2x4x93 boards
1-1/4" screws
2" screws
3" screws

Final cuts:
Sides- 2@80.5"
Head/foot- 2@63.5"
Base-3@83.5"
Slats-8 to 15@59.25"

Want to build the headboard?
https://youtu.be/DMZdmD-2ovk

Looking to build a King size bed? Check out my how to on that build here: https://youtu.be/c-1d89HXfxk

The board cuts for a Full Size Bed are:
2 @ 74.5" for Sides
2 @ 57.5" for Head and Foot
2 @ 77.5" for two runners
8 to 12 @ 53.25" for slats.

Cuts for a twin bed:
2@ 74.5" sides
2@ 42.5" head/foot
2@ 77.5" runners
8 to 15 @ 38.25" slats

Visit my Amazon Store:
http://astore.amazon.com/latoho-20

Check out the Land To House website:
http://www.landtohouse.com

Send Me Mail:
Land To House llc
P.O. Box 323
Micaville, NC 28755

See whats coming up before it hits Youtube on my Facebook Page:
https://www.facebook.com/LandToHouse

#queen #bedframe #diybedframe

Видео Queen Size Bed Frame DIY канала Land to House