2.0 Ford Pinto First Start in 2022 | Oil Prime and Startup Attempt (Ford SOHC Capri Cold Start)
After many months of neglect I'm about to try start the 2.0 Pinto engine under the hood of my mk3 Ford Capri. As it's been a while since the engine last ran I'm doing a quick health check before turning the key. This involves removing the spark plugs and the rocker cover then giving the valvetrain a visual inspection - making sure I've got no unusual wear to the cam or the followers, and that the valve stem seals are in position and look in good health. Once that's done I'm going to prime the oil system. This is important as it ensures oil has worked it's way around the engine before I attempt to start it. This is especially crucial on a freshly built engine, but also doesn't hurt if the engine has sat for a while (like mine!)
The Engine in this video is a Modified 2.0 Pinto (SOHC) Engine out of my 1978 Ford Capri. For more Information, Tech, & Maintenance Tips on this classic 4 - banger, check out this playlist: https://www.youtube.com/playlist?list=PLx54n6KmznFZYUeL8OKQ96j_udVuqT6_s
🔴 Subscribe for more free Tech Tips: https://www.youtube.com/c/fastrust?sub_confirmation=1
Видео 2.0 Ford Pinto First Start in 2022 | Oil Prime and Startup Attempt (Ford SOHC Capri Cold Start) канала Fast Rust
The Engine in this video is a Modified 2.0 Pinto (SOHC) Engine out of my 1978 Ford Capri. For more Information, Tech, & Maintenance Tips on this classic 4 - banger, check out this playlist: https://www.youtube.com/playlist?list=PLx54n6KmznFZYUeL8OKQ96j_udVuqT6_s
🔴 Subscribe for more free Tech Tips: https://www.youtube.com/c/fastrust?sub_confirmation=1
Видео 2.0 Ford Pinto First Start in 2022 | Oil Prime and Startup Attempt (Ford SOHC Capri Cold Start) канала Fast Rust
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Intercooler/Intake Pipework - Routing & Installation | Supercharging an MX5 Miata Ep 24](https://i.ytimg.com/vi/YqiO_Zay8yc/default.jpg)
![Removing Rust from an Engine Cylinder Head Using Electrolysis / DIY Electrolysis Bath | Tech Tip 03](https://i.ytimg.com/vi/YZBK43iigfc/default.jpg)
![Swapping ECUs! ME221 PNP Standalone ECU Install Part 01 | Supercharging an MX5 Miata Build Ep 07](https://i.ytimg.com/vi/XOrVcsEZFuE/default.jpg)
![Budget A-Frame Axle Location Kit - Fabrication & Install (Watts / Panhard Alternative) | Tech Tip 28](https://i.ytimg.com/vi/VsNSrjB7NVs/default.jpg)
![How To Replace Bent or Broken Wheel Studs - Removal and Installation | Tech Tip 34](https://i.ytimg.com/vi/9tocOo2Wjmc/default.jpg)
![Supercharger Inlet & Outlet Install - Eaton MP45 Prep Part 02 | Supercharging the MX5 / Miata Ep 20](https://i.ytimg.com/vi/aWWTUszlkpQ/default.jpg)
![Ford Capri | RAF Marham Track Day](https://i.ytimg.com/vi/8nCk4ySqhe4/default.jpg)
![How Good Is It?? Test Drive & First Impressions 1.8VVT NBFL | Mazda MX5 / Miata Review - Episode 02](https://i.ytimg.com/vi/22YvwW7Bu7M/default.jpg)
![How to Change Engine Oil & Filter *BEGINNERS GUIDE* | Tech Tip 06](https://i.ytimg.com/vi/RgTaqxwXLNA/default.jpg)
![Making Room for Gauges - Instrument Panel Installation How To | Supercharging an MX5 Miata Ep 05](https://i.ytimg.com/vi/As6qp71OB_c/default.jpg)
![Head Gasket Replacement & Bolt Torque on a Ford Pinto (SOHC) Engine | Tech Tip 01](https://i.ytimg.com/vi/tIgj312LZUA/default.jpg)
![Standalone ECU & Injectors for the Supercharged MX5 Build | MX5 Miata Episode 06](https://i.ytimg.com/vi/MHT3TcqeAXQ/default.jpg)
![Ford Capri 2.0 Pinto | 1/4 Mile Part 01](https://i.ytimg.com/vi/qfjXgZkRzbc/default.jpg)
![Ford Capri 2.0 Pinto | 1/4 Mile Part 02](https://i.ytimg.com/vi/zDUVLKMOfmo/default.jpg)
![How to Set Your Engines Base Timing - ME221 ECU Install Part 04 | Supercharging an MX5 Miata Ep 12](https://i.ytimg.com/vi/hkgn7KEEsfc/default.jpg)
![How to Install an Alloy Radiator & Wire Dual Fans | Supercharging the MX5 Miata Ep 14](https://i.ytimg.com/vi/HXh2fRHS-2Q/default.jpg)
![Brake Pads - How to Inspect & Replace on a Classic Car | Tech Tip 05](https://i.ytimg.com/vi/pdAKEq6DUyg/default.jpg)
![How to Install an Air to Air Intercooler Pt01 - Radiator Relocate | Supercharging the MX5 Miata Ep17](https://i.ytimg.com/vi/C6M4Ayo74pE/default.jpg)
![Eaton MP45 Supercharger Service - Snout Oil Change & KAVS Reduction Pulley Install | MX5 Miata Ep 18](https://i.ytimg.com/vi/LZzQunoo28s/default.jpg)
![DMAX | Daytona Milton Keynes](https://i.ytimg.com/vi/XrZ4zycQqno/default.jpg)
![NEW PROJECT CAR ALERT!!](https://i.ytimg.com/vi/XXluJxE7oXE/default.jpg)