Analog/Digital/Pulse to CAN Bus Converter (8x) | CANmod.input

Analog/Digital/Pulse to CAN Bus Converter (8x) | CANmod.input
https://www.csselectronics.com/products/analog-to-can-bus-digital-pulse

In this intro we introduce the CANmod.input

- 00:00 Introduction
- 00:35 Key features of the voltage-to-CAN module
- 02:50 Examples of analog, digital & pulse sensors
- 03:40 Use cases
- 04:45 Adapter cables & daisy chaining

The CANmod.input is a 100% standalone analog/digital/pulse-to-CAN module with 8 input sensor channels.

For each input channel, the module measures both the analog, digital and pulse version of the signal, letting you easily mix different sensors. The recorded sensor values are output via a CAN interface.

You can deploy the CANmod.input to directly inject sensor data into your existing CAN bus application (e.g. a car, truck, bus, machine, ...). Or, you can use it as an extension for e.g. our CANedge CAN bus data logger. This combination lets the CANedge serve as an input sensor data logger via the 2nd CAN channel, while it enables logging of data from your CAN application via the 1st CAN channel.
Key features include:

- PLUG & PLAY: Standalone - no PC required. Integrate with any CAN bus to add input sensor data. DBC included

- COMPACT: 7 x 2 x 5 CM. 70G. 8 LEDs. 5-26 V DC via DB9. 3.3V excitation signals. USB for config/FW/stream

- 8 X ANALOG: 8 analog input channels (1 kHz, 10 bit). Configurable voltage ranges (0-0.625V to 0-10V)

- +DIGITAL: Digital input reading of each channel. 1 kHz. Configurable low/high/hysteresis

- +PULSE: Pulse input reading of each channel. 16 kHz. Frequency or counter mode (up to 32 bit)

- CONFIGURABLE: Configure sensors, CAN IDs, bit rate, frequencies and more via JSON config and GUI

Examples of supported sensors include below:

1) ANALOG: Sensors that produce analog outputs include force/pressure sensors, current, distance (ultrasonic, laser, lidar, infrared), rotation (potentiometers), hall effect, magnometers, gyroscopes - and many more.

2) DIGITAL: Sensors with digital outputs include hall effect switches, buttons, reed switches, RTD sensors and more. Many sensors with analog outputs also produce optional digital outputs.

3) PULSE: Sensors with pulse-oriented outputs include rotational speed sensors, rotational position sensors, buttons & toggle switches (event counters), frequency meters and sensors producing e.g. PWM outputs.
Get your CANmod.input today!
https://www.csselectronics.com/products/analog-to-can-bus-digital-pulse

___________________________________________

If you're interested in learning more about logging CAN bus data, we recommend that you check out our below intros to our CANedge CAN bus data loggers, our CANmod sensor-to-CAN modules and our free software/API tools:

Learn about CAN bus data logging:
https://www.youtube.com/watch?v=KhNQJv6TNl8&list=PLpV68vjf4Xo4NT0hXMEp5A9bXqfX9sFQo&index=1

Learn about the CANedge and CANmod:
https://www.csselectronics.com/pages/can-bus-hardware-products

1) CANedge1: https://www.csselectronics.com/products/can-logger-sd-canedge1
2) CANedge2: https://www.csselectronics.com/products/can-bus-data-logger-wifi-canedge2
3) CANedge3: https://www.csselectronics.com/products/can-bus-data-logger-4g-lte-canedge3-gnss
4) CANmod.gps: https://www.csselectronics.com/products/gps-to-can-bus-gnss-imu
5) CANmod.temp: https://www.csselectronics.com/products/thermocouple-to-can-bus
6) CANmod.input: https://www.csselectronics.com/products/analog-to-can-bus-digital-pulse

See also our intros to practical CAN data logging:

1) J1939 telematics: https://www.csselectronics.com/pages/j1939-data-logger-wifi-telematics-fleet-management
2) OBD2 telematics: https://www.csselectronics.com/pages/obd2-data-logger-sd-memory-convert
3) Marine telematics: https://www.csselectronics.com/pages/marine-telematics-boat-data
4) Grafana telematics dashboards: https://www.csselectronics.com/pages/telematics-dashboard-open-source
5) asammdf GUI: https://www.csselectronics.com/pages/asammdf-gui-api-mdf4-mf4

For more tutorials, see our overview: https://www.csselectronics.com/pages/can-bus-intros-tutorials

___________________________________________

At CSS Electronics we specialize in simple-to-use, pro specs and interoperable CAN bus data loggers - like the CANedge and CLX000 series. The devices let you record raw data from e.g. cars, trucks, industrial machinery and other CAN based applications onto an 8-32 GB SD card. The devices are interoperable, meaning you can process the data in your favorite existing software - or use our 100% free and open source software/API tools.

Website: https://www.csselectronics.com
Products: https://www.csselectronics.com/pages/can-bus-hardware-products
Software: https://www.csselectronics.com/pages/can-bus-software-api-tools
Case studies: https://www.csselectronics.com/pages/can-bus-data-logger-case-studies

We offer 100% free technical sparring - contact us:
https://www.csselectronics.com/pages/contact-us

Видео Analog/Digital/Pulse to CAN Bus Converter (8x) | CANmod.input канала CSS Electronics