Yamaha R1 carbs leaking fix.
Yamaha R1 2001, leaking fuel how to fix and replace carburetor o-rings on fuel rail tubes, there are three different size tubes in between the 4 carbs.
I was disgusted at what the local Yamaha dealer wanted for 6 o-ring seals which was almost £50.00 ! so decided to buy a set of 250 oil, diesel and petrol resistant seals for £4.99 and try them, so here's what you need to do if your carbs leak fuel from the fuel rail tubes when the ignition is on and the fuel pump is running, if you touch or press the tubes and they leak fuel out and onto your finger then have a go yourself, I dread to think what the dealer would charge for this.
Try the 6 mm inside diameter 2 mm ring section width, giving a 10 mm outside diameter, when on it will stretch to 10.50 mm which works just fine it'll be stiff to push in and make sure there's a nice smear of grease on the seals to help them slip in while pressing on the body's of the carbs. do one tube at a time, don't let the bolts come right off leave them on the last bit of thread and be careful not to dislodge the other tubes at the other side of the carb keep checking.
That was the one size I used but check yourself as I tried a few different ones and that size defiantly works.
Anyway good luck.
Видео Yamaha R1 carbs leaking fix. канала yamaar1rider
I was disgusted at what the local Yamaha dealer wanted for 6 o-ring seals which was almost £50.00 ! so decided to buy a set of 250 oil, diesel and petrol resistant seals for £4.99 and try them, so here's what you need to do if your carbs leak fuel from the fuel rail tubes when the ignition is on and the fuel pump is running, if you touch or press the tubes and they leak fuel out and onto your finger then have a go yourself, I dread to think what the dealer would charge for this.
Try the 6 mm inside diameter 2 mm ring section width, giving a 10 mm outside diameter, when on it will stretch to 10.50 mm which works just fine it'll be stiff to push in and make sure there's a nice smear of grease on the seals to help them slip in while pressing on the body's of the carbs. do one tube at a time, don't let the bolts come right off leave them on the last bit of thread and be careful not to dislodge the other tubes at the other side of the carb keep checking.
That was the one size I used but check yourself as I tried a few different ones and that size defiantly works.
Anyway good luck.
Видео Yamaha R1 carbs leaking fix. канала yamaar1rider
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Yamaha R1 Carb rebuildCarbs leaking? Here is how to fix it.R1 2000 5jj ,#01, first time look around, fuel sender,air filter, fuel pump and hoses....FPF Yamaha R1 fuel pump installationYAMAHA R1 OVERHEATING FIXSunday Ride With My 2003 Yamaha R1Yamaha R1 spark plug replacementYamaha R1 4XV 2000 Carburetor repairDIY Carb Sync Yamaha R6 & R1Swedish Motovlog - 2016 Yamaha R1 Testride!2004-2006 Yamaha R1 Engine Removal - TutorialYamaha R1 2000 Tuning and Carb Service2000 Yamaha YZF R6 Carburettors InstallHow to Fix Engine Oil Leaks in Your CarYAMAHA R1 5JJ RESTORATIONR6 Removing Tank/Carbs: Tank and Airbox (part 2)Escort Mk1 Pinto Throttle Body Conversion. Episode 1. Carb Removal, Jenvey assembly,R1 2000 5jj #04 Low Fuel Sensor strip and replace, diagnoses out of the bike ...How-To: Diagnose Motorcycle Vacuum LeaksFuel Line Leak Quick Cheap Fix