62 Marking the printer body drive postion.MOV
In this video we will mark the printer center of the drive rod (or where it used to be!) in preparation of mounting the printer to the base.
Видео 62 Marking the printer body drive postion.MOV канала lpartco
Видео 62 Marking the printer body drive postion.MOV канала lpartco
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
30A Cutting the original drive shaft ajustment frame Epson R1900.MOV45 Making the cut ASF Epson R1900 flat bed printer14 The epson r1900 PE sensor.MOV16 Wires under the papertray rerouting Epson R1900.MOV25C Removal of drive bar support Epson R1900.MOV28 The wheels and truck drive for thr Epson R1900 build.MOV42 making the gear stay ASF Epson R1900 flat bed printer56 Putting the spacers onto the tray.MOV61 Marking the drive position on the print base.MOV24 drive motor removal Epson R1900.MOV22 Removing the PE Sensor Epson R1900.MOVepson r1900 print from left sideEpson r1900 print from top side31 cutting out the frame of the Epson R1900.MOV9 Removing the botom plastic.MOV18C removing the front roller section part 1 Epson R1900.MOV26 removal of the main drive shaft from the Epson R1900.MOVEpson R1900 case off boot up top side59 Final mounting of the tray.MOV12 remove main control panel epson R1900.MOV