31 cutting out the frame of the Epson R1900.MOV
Now for the part the scared the hell out of me and turned out to be the easiest part of the project so far. Well removing the gear with my eyes closed, behind my back, standing on my head was easy also. Anyway we are going to cut the frame of the printer to create a tunnel. You will need a tin snip and strong hands. You could do this with a hacksaw although the mess in the printer would not be good.
Видео 31 cutting out the frame of the Epson R1900.MOV канала lpartco
Видео 31 cutting out the frame of the Epson R1900.MOV канала lpartco
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
30A Cutting the original drive shaft ajustment frame Epson R1900.MOV
45 Making the cut ASF Epson R1900 flat bed printer
14 The epson r1900 PE sensor.MOV
16 Wires under the papertray rerouting Epson R1900.MOV
25C Removal of drive bar support Epson R1900.MOV
28 The wheels and truck drive for thr Epson R1900 build.MOV
42 making the gear stay ASF Epson R1900 flat bed printer
56 Putting the spacers onto the tray.MOV
61 Marking the drive position on the print base.MOV
24 drive motor removal Epson R1900.MOV
22 Removing the PE Sensor Epson R1900.MOV
62 Marking the printer body drive postion.MOV
epson r1900 print from left side
Epson r1900 print from top side
9 Removing the botom plastic.MOV
18C removing the front roller section part 1 Epson R1900.MOV
26 removal of the main drive shaft from the Epson R1900.MOV
Epson R1900 case off boot up top side
59 Final mounting of the tray.MOV
12 remove main control panel epson R1900.MOV