I Made A Keyboard For My Pi Using The xTool M1

The M1 is a new new product by xTool that includes both a diode laser module and a blade-cutting tool, allowing it to process a wider range of materials. Its all-enclosed design also makes it much safer to use and it's able to properly extract any smoke and fumes processed during cutting and engraving. I used the M1 to cut and engrave a keycap set for my new mechanical keyboard that I'm going to use on my Raspberry Pi setup.

ADDITIONAL INFORMATION
---------------------------------------------------
Check out xTool's web store to get your own M1 - https://bit.ly/3eiN4FS

Visit my blog for the written guide and to download the keycap design files to make your own set - https://www.the-diy-life.com/i-made-a-keyboard-for-my-pi-using-the-xtool-m1/

Additional Materials Packs - https://bit.ly/3fTXtYN

PURCHASE LINKS
---------------------------------------------------
xTool M1 Deluxe Bundle - https://bit.ly/3eiN4FS
If you don't get the deluxe bundle, you'll also need two A4 size sheets of 3mm plywood to make up the keycaps.
GK61 Mechanical Keyboard - https://amzn.to/3erYbMt
Gateron G-Pro Series Red Switches - https://amzn.to/3TcXo0C
Superglue - https://amzn.to/3CnXTOJ
Masking Tape - https://amzn.to/3rLaKWd
White Spray Paint - https://amzn.to/3yuHN4L

Equipment Used
Creality Ender 3 S1 Pro - https://amzn.to/3yuTMPM

Some of the above parts are affiliate links. By purchasing products through the above links, you’ll be supporting this channel, at no additional cost to you.

CHAPTERS
---------------------------------------------------
0:00 Intro
0:47 Unboxing The M1
1:53 Air Purifier
3:47 Designing The Keyboard
5:53 Cutting The Keycap Components
8:38 Assembling The Keyboard
10:03 Testing The M1's Other Features
11:17 Keyboard RGB
11:44 Final Thoughts

If you've got any ideas for Raspberry Pi, Arduino, or other Electronics projects or tutorials you'd like to see, let me know in the comments section.

Видео I Made A Keyboard For My Pi Using The xTool M1 канала Michael Klements