I Turned PET Bottles Into A 3D Printed Pi Case - DIY Bottle Recycler

A few weeks ago I published a project on the controller that I designed for a PET bottle recycler that I've been working on. I've now completed the rest of the design and at the end of the video, I use it to turn a few old PET bottles into a new case for my Raspberry Pi.

ADDITIONAL INFORMATION
---------------------------------------------------
Visit my blog for the 3D print files, PCB Gerber files and build guide - https://www.the-diy-life.com/i-turned-pet-bottles-into-a-3d-printed-pi-case-pet-bottle-recycler-part-2/

Visit my GitHub repository for the code - https://github.com/mklements/PETRecyclerController

PURCHASE LINKS
---------------------------------------------------
608 Ball Bearings - https://amzn.to/48GFegl
M8 Threaded Rod - https://amzn.to/45ojNOc
M8 Nuts - https://amzn.to/3ZP7BFl
M3 Button Head Screws (8mm and 40mm) - https://amzn.to/3Q6vQvo
M3 Brass Inserts - https://amzn.to/3Q7TvLR
M2.5 Button Head Screws (6mm) - https://amzn.to/3rInSiB
M2.5 Brass Inserts - https://amzn.to/3Q7TvLR
Aluminium Strip - https://amzn.to/3tou9jV
M5 Button Head Screws (10mm) - https://amzn.to/3ZPbDNC
M5 V-slot Nuts - https://amzn.to/3tou6Vh
2020 V-Slot Extrusion 500mm - https://amzn.to/45hRfGg
3D Printer Hotend - https://amzn.to/3ZOrZpT
3mm Plywood Sheet - https://amzn.to/48MOEXC
GT2 60 Teeth Pulley 8mm Bore - https://amzn.to/3LRzarN
GT2 30 Teeth Pulley 8mm Bore - https://amzn.to/3LRzarN
GT2 Timing Belt - https://amzn.to/3LRzarN
Nema17 27:1 Geared Stepper Motor - https://amzn.to/46GOPlG
Dia. 8mm x 200mm Shaft (To Cut In Assembly) - https://amzn.to/48LiL1D
M3 Nylon Standoffs - https://amzn.to/45vsu9O
TMC2208 Stepper Motor Driver - https://amzn.to/46UWtcP
Arduino Pro Mini 5V - https://amzn.to/3tuq39S
IRFZ44N Mosfet - https://amzn.to/3NZTKpT
I2C OLED Display - https://amzn.to/3Q10whM
1/2W Resistors - https://amzn.to/3K1AXJC
Capacitors - https://amzn.to/3OjSTSx
Rotary Pushbutton - https://amzn.to/3rDP3uo
2 Pin Screw Terminals - https://amzn.to/44w8QL4
Barrel Jack Socket - https://amzn.to/3OlQR4r
12V Power Supply (US Plug Linked) - https://amzn.to/3rHgyDY

Tool & Equipment Used:
Pokit Pro Multimeter - https://bit.ly/3FkcfRX
Creality Ender 3 S1 Pro - https://amzn.to/39lxlTX
InfiRay P2 Pro Thermal Camera - https://amzn.to/48SxWq7
Jobi Gorilla Pod - https://amzn.to/43lVRef
USB C Electric Screwdriver - https://amzn.to/3aOeDVa
Hakko Soldering Iron - https://amzn.to/3NBeUe3
Hakko Brass Insert Tips - https://amzn.to/3NtfR84

Some of the above parts are affiliate links. By purchasing products through the above links, you’ll be supporting this channel, at no additional cost to you.

CHAPTERS
---------------------------------------------------
0:00 Intro
1:09 Designing The PET2Print
1:35 Assembling The Cutter
4:25 Hot End First Attempt
4:56 Assembling The Reeler
7:56 Assembling The Controller
8:46 Programming & Controller Setup
12:08 Hot End Second Attempt
13:29 First Filament Pulls
15:26 Test Prints
16:36 Raspberry Pi Case Print
17:33 Final Thoughts

If you've got any ideas for Raspberry Pi, Arduino, or other Electronics projects or tutorials you'd like to see, let me know in the comments section.

Видео I Turned PET Bottles Into A 3D Printed Pi Case - DIY Bottle Recycler канала Michael Klements