Switch V1/V2 Picofly Easy Guide 2026

Unlock the full Picofly experience with this complete, step-by-step Nintendo Switch V1 & V2 installation guide — updated for 2026.
This is the most detailed walkthrough I’ve ever made, covering every stage of the process from opening the console to reinstalling the final screw.

Whether you're modding a V1 Switch, V2 (Mariko), or just want to understand which Picofly version to use, this guide breaks everything down clearly, safely, and in the correct order.

I also include measurements, tips, pro-level troubleshooting steps, and a few tricks that will massively improve your success rate.

💥 PLUS: Switch OLED Giveaway!
Watch the full video for details on how to enter.

🔧 What This Guide Covers

✔️ Picofly V1 vs V2 — which one you should actually be using
✔️ Safe disassembly steps for the Switch V1/V2
✔️ CPU cap measurements & proper soldering technique
✔️ EMMC removal, prep, and reinstall
✔️ Shield modification and reinstallation
✔️ High-success-rate install method
✔️ Pro tips to avoid common mistakes

🧰 Tools Needed

✔️ Multimeter
✔️ Fine soldering iron tip (set to 380°C)
✔️ Regular soldering iron tip
✔️ Kapton tape
✔️ Strong scissors
✔️ Thermal paste (recommended: Arctic MX-4)
✔️ Tri-wing screwdriver
✔️ Phillips #000 screwdriver
✔️ Plastic pry tools
✔️ Tweezers (one pair should be ceramic)

💬 Support the Channel

If this guide helped you, consider subscribing, liking, or dropping a comment. It helps a lot and tells me to keep making improved Picofly and modding content!

📌 Chapters

00:00 Intro
00:30 Giveaway Switch OLED
01:52 Which Picofly version to use V1
02:40 Which Picofly version to use V2
04:15 Taking the Backplate off the Switch
07:30 Removing the RF shield
08:52 Cleaning up solder paste
09:54 Removing the heat sync
12:43 Removing and prepping the EMMC
14:06 Removing the CPU Shield
17:50 Checking the SD Card Reader (Pro Tip)
18:45 Soldering and measuring the CPU caps
29:42 Prepping CPU shield
32:41 Installing the EMMC and Picofly board
35:54 Reinstalling the HeatSync
38:45 Cutting the RF Shield
40:13 Reinstalling the RF shield
41:51 Reinstalling the back plate
44:32 Final test and outro
_______________________________________
Stickers SlothGaming
Source: https://www.ebay.co.uk/usr/slothgamingetsy
_______________________________________

Affilate Links

Filament : https://elegoo.sjv.io/APEOoo

NYXI Wizard : https://nyxigame.com/products/16058269034750914685113291?source_type=sales_plugin_af&slt=sales_plugin_af&referral_code=8OXV2CNYSE7K

Видео Switch V1/V2 Picofly Easy Guide 2026 канала QTronics