LS6 sailplane instrument panel rebuild - step 2

I forgot to switch on the camera while un-bagging...
In any case, this is what was coming out. I'm very happy with the result. The surface looks good and the structure is strong. The layers thickness was correct, so no steps on the surface, which is important for a stable instrument clamping. Next step will be to cut the hole for the V80, and after i will move on with sanding and finishing. Few holes will be cut at the very end, for the main switch, the flarm led, and the fixation holes to the cockpit structure. The last ones will be done after mating the panel with the rest of the cockpit, to make sure everything fits correctly. Circuit breakers are not on the panel in my case, so less struggless. Next time i promise to switch on the camera.

Видео LS6 sailplane instrument panel rebuild - step 2 канала Domenico Bosco