Traditional Korean floor 대청마루 ( daecheongmaru) PART I -a wooden floor without nails, screws or glue
Traditional Korean carpenters displayed thier skill and understanding of wood most expertly in the traditional 대청마루 Daecheongmaru floors found in so many Hanok houses.
A detour from the whole wooden floor process seen in much of the world, the floor boards are not cut into slim strips and nailed down to prevent their movement. Neither is there a sub floor and seperate finish floor. The Korean craftsman left the boards as large and wide as they could, and instead of controling their movement by cutting them down thin and nailing them in place, there were held within a groove cut into the joists, leaving the boards free to expand and contract as needed, but unable to cup or distort, much like a panel frame door.
Japanese joinery was used in our case to lock the floor beams and joists together.
There are various regional variations on these floors, and many ways they could be accomplished. We chose a simple dovetail groove with board ends cut at a mathing angle to be the best for us. Individual boards are further joined together with dowels.
Much thanks to Jay C Whitecloud, whose patient instruction and explaination were invaluable in this endeavor.
.............................................…………………………………………………………………….
My Website: https://mrchickadee.com/
My Instagram: https://www.instagram.com/mr_chickadee1/
.............................................…………………………………………………………………….
Видео Traditional Korean floor 대청마루 ( daecheongmaru) PART I -a wooden floor without nails, screws or glue канала Mr. Chickadee
A detour from the whole wooden floor process seen in much of the world, the floor boards are not cut into slim strips and nailed down to prevent their movement. Neither is there a sub floor and seperate finish floor. The Korean craftsman left the boards as large and wide as they could, and instead of controling their movement by cutting them down thin and nailing them in place, there were held within a groove cut into the joists, leaving the boards free to expand and contract as needed, but unable to cup or distort, much like a panel frame door.
Japanese joinery was used in our case to lock the floor beams and joists together.
There are various regional variations on these floors, and many ways they could be accomplished. We chose a simple dovetail groove with board ends cut at a mathing angle to be the best for us. Individual boards are further joined together with dowels.
Much thanks to Jay C Whitecloud, whose patient instruction and explaination were invaluable in this endeavor.
.............................................…………………………………………………………………….
My Website: https://mrchickadee.com/
My Instagram: https://www.instagram.com/mr_chickadee1/
.............................................…………………………………………………………………….
Видео Traditional Korean floor 대청마루 ( daecheongmaru) PART I -a wooden floor without nails, screws or glue канала Mr. Chickadee
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Traditional Korean floor 대청마루 ( daecheongmaru) PART II a wooden floor without nails, screws or glueStone Foundation[Woodworking] Making A Korean Style Small Tea Table / No Screw / Wood JointsRaising our timber frame workshop전통 [우물 마루] 시공 Korean style wooden floorThe Asian Roubo Timber frame workbench, no nails, screws or glue, Japanese / Chinese joineryMaking a wood brick floor for our blacksmith shophewing a white oak 6"x6"Cabin Pine Floor DIY Cheap Wood Floor How ToHow to build a tiny masonry heater for the woodshopRestoring an Ancient Barn Roof | Part 1Japanese Timber Frame Smithy RaisingSteam Bending Wood, 1" Thick Kiln Dried Ash | Stagecoach TopsBUILDING WOOD STAIRS WITH NO NAILS!!Yakisugi ( 焼杉 ) Shou Sugi Ban ( 焼杉板 ) Yakiita ( 焼板 ) Burned wooden sidingAMAZING JAPANESE WOODWORKING, ART, CARPENTRY, CABINETMAKING CompilationHewing Curvy Timbers for Japanese Timber FrameJapanese Timberframe Part I Stones and SillsNO SCREW NO GLUE - AMAZING JAPANESE WOODWORKING CARPENTRY ARTBuilding a Hobbit style root cellar with stone Part I