S07E03 - Replace the Broken Pedal Pin - Quick Tip
Hello and welcome back.
Here is a quick tip on how to replace the broken pin on your pedals.
You start by drilling straight through the broken pin with a smaller drill bit than the pin itself.
You should aim right down the centre of the pin and be careful not to damage the threads.
Jam the screwdriver into the drilled hole. The screwdriver must fit into the pin hole.
You should be able to slowly unscrew the broken pin grabbing it by the sides.
When removed, check that the threads are not damaged and replace the pin with the new one.
Thank you for stopping by. Feel free to check out our other videos.
Visit: http://bikebook.si
Видео S07E03 - Replace the Broken Pedal Pin - Quick Tip канала bikebook
Here is a quick tip on how to replace the broken pin on your pedals.
You start by drilling straight through the broken pin with a smaller drill bit than the pin itself.
You should aim right down the centre of the pin and be careful not to damage the threads.
Jam the screwdriver into the drilled hole. The screwdriver must fit into the pin hole.
You should be able to slowly unscrew the broken pin grabbing it by the sides.
When removed, check that the threads are not damaged and replace the pin with the new one.
Thank you for stopping by. Feel free to check out our other videos.
Visit: http://bikebook.si
Видео S07E03 - Replace the Broken Pedal Pin - Quick Tip канала bikebook
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Drivetrain 5/6World cup Maribor 2010 - 4x Friday qualifyingČiščenje in mazanje ragljeReplacing internally routed cableMenjava hidravlične zavorne cevi Hayes HFX-9Basic Tools for Bike MaintenanceMarzocchi 888 RCV - oil changeReplace bearings on a bicycle frame - Liteville 301Pedal Maintenance - Kona Jackshit PrimoBikepark MB - red line - May 2011How to adjust rear derailleurS07E04 - How to remove the rubber handlebar gripsHow to patch an inner tube - flat tireS07E02 - RockShox Lyrik Inner Cartridges ServiceHow to replace a Bottom Bracket - Square TaperHow to clean and lube a head tubeNicolai ION 16 - bike assembly (re-upload)How to replace metal eyelet bushings - Fox Float RP2Emergency Tire Repair: Sidewall cutWheels 4/6