BMP180 and BME280 with Oled Display - Arduino
At the heart of the module is the next-generation digital temperature, humidity and pressure sensor manufactured by Bosch – BME280. It’s a successor to sensors like BMP180, BMP085 or BMP183.
This precision sensor can measure relative humidity from 0 to 100% with ±3% accuracy, barometric pressure from 300Pa to 1100 hPa with ±1 hPa absolute accuracy, and temperature from -40°C to 85°C with ±1.0°C accuracy.
The pressure measurements are so precise (low altitude noise of 0.25m), you can even use it as an altimeter with ±1 meter accuracy.
Code and Schematic: https://drive.google.com/drive/folders/1NJtNRaQV5A8er9sw-ZVY4UpGoApJYsYT?usp=sharing
I Hope you like this video, if so don't forget to like, share and subscribe thank you and i will see you next time.
Видео BMP180 and BME280 with Oled Display - Arduino канала KOTOBUKI CHANNEL
This precision sensor can measure relative humidity from 0 to 100% with ±3% accuracy, barometric pressure from 300Pa to 1100 hPa with ±1 hPa absolute accuracy, and temperature from -40°C to 85°C with ±1.0°C accuracy.
The pressure measurements are so precise (low altitude noise of 0.25m), you can even use it as an altimeter with ±1 meter accuracy.
Code and Schematic: https://drive.google.com/drive/folders/1NJtNRaQV5A8er9sw-ZVY4UpGoApJYsYT?usp=sharing
I Hope you like this video, if so don't forget to like, share and subscribe thank you and i will see you next time.
Видео BMP180 and BME280 with Oled Display - Arduino канала KOTOBUKI CHANNEL
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
BMP280 Barometric pressure and temperature sensor with ArduinoEasy use of BMP280 to measure Pressure, Temperature and Altitude with Arduino + OLEDAnimations on OLED display - ArduinoAutomate Your Grow with Home Assistant #5: Wireless Temp & Humidity w/ BME280 Boards & Ruuvi TagsBMP180 pressure sensor Arduino tutorial | Step by step instructions [Code & Circuit diagram]OLED Display & BME280 Sensor | ESP8266 & NodeMCU programmieren | Teil 4 [GERMAN/DEUTSCH]GC9A01 Round LCD with ESP32 & ArduinoLe FAQ su Arduino || Sensore BMP280Wiring GRBL dengan Arduino + TB 6600Módulos para Arduino - Vídeo 04 - Módulo Relé28. Дешёвый датчик температуры, влажности и давления для Умного Дома. BME280 + OpenHAB. Инструкция.Arduino Project: Advanced Datalogger with ATMEGA328, BMP180, DHT22, BH1750 and sd cardBMP280 Датчик атмосферного давления, температуры и высотыUsing the Arduino Pro Mini & FTDIUsing Power MOSFET Transistors with MicrocontrollersBELAJAR 44 PEMROGRAMAN ARDUINO - OLED display 128x64How to create your own Weather Station in Home Assistant!DHT11 Sensor für Temperatur und Luftfeuchtigkeit am ArduinoBME280 Weather Station | With Arduino, ESP8266 & ESP32How to assemble an IOT NodeMCU Weather Station Kit