Band Saw Table Extensions for Slicing of Wide Boards with the Accu-Slice (61)
This video describes the production and application of table extensions to the front of the band saw table to enable the slicing of wide boards with the Accu-Slice band saw accessory. The extensions are made from 2' x 3" iron angles which are mounted to the font edge of the band saw table. Using these extensions it is now possible to slice bords up to 5" wide with the Accu-Slice System.
Видео Band Saw Table Extensions for Slicing of Wide Boards with the Accu-Slice (61) канала Accu-Slice
Видео Band Saw Table Extensions for Slicing of Wide Boards with the Accu-Slice (61) канала Accu-Slice
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Tormach 8L Lathe - Conversion of the OXA Tool Post to the AXA Tool Post](https://i.ytimg.com/vi/yOmVXIb8skA/default.jpg)
![Alignment of the Band Saw to Assure Optimum Performance of the Accu-Slice System (47)](https://i.ytimg.com/vi/_r7ktyT5IbQ/default.jpg)
![Eight Sided Star Patterns on the Band Saw - Part 2 - Assembling the Star Patterns (113)](https://i.ytimg.com/vi/tUcaYrRwQtg/default.jpg)
![Six Sided Celtic Ring Woodturning Projects - Part 1 - Single Rings (104)](https://i.ytimg.com/vi/VOEZXETRd2Q/default.jpg)
![Laminated Knife Handles - Variation in Design (90)](https://i.ytimg.com/vi/nZrw9k91rz0/default.jpg)
![Tapered Screw Style Offset Cam Clamps](https://i.ytimg.com/vi/BdscnQML1CA/default.jpg)
![Custom Glue Up Jigs for Aligning Segments When Gluing - Part 1 - Segmented Eggs](https://i.ytimg.com/vi/w1junrV185o/default.jpg)
![New Delrin Roller Bearings for the Accu-Slice Carriages - Machining, Installation and Testing](https://i.ytimg.com/vi/uzAW1Zns5GM/default.jpg)
![Accu-Wedge System Mounted Directly on the Band Saw Table - Part A - Descriptions & Installation](https://i.ytimg.com/vi/sk3NvOUG2lQ/default.jpg)
![DMM Servo Motor Two-Piece Cable Connector Cases](https://i.ytimg.com/vi/09ouAqWxFWE/default.jpg)
![Automation of the Accu-Slice System - Indexer Modifications - Part 6 -134](https://i.ytimg.com/vi/Ezm4qFMUcnw/default.jpg)
![Machining Long Bars on the Tormach Lathe and CNC Mill](https://i.ytimg.com/vi/bY4vLo5iFqw/default.jpg)
![The Accu-Slot Celtic Ring System (102)](https://i.ytimg.com/vi/vNLua6XL-VY/default.jpg)
![3-D Printed Lathe Face Plates - A Low Cost Face Plate for the Lathe](https://i.ytimg.com/vi/qOlOexMxSkM/default.jpg)
![Assembly of the Accu-Slice Index Table - Part 1 - Design and Assembly](https://i.ytimg.com/vi/7-motPp0p6I/default.jpg)
![Accu-Wedge Direct on the Band Saw Table - No need for the Accu-Slice](https://i.ytimg.com/vi/dtNRRtwgkBQ/default.jpg)
![Trapezoid Wedge Segmented Bowl, 105 degree wedges, 24 segments per layer - 135](https://i.ytimg.com/vi/9wSA87lYLUA/default.jpg)
![NEMA 24 End Plate for Open Builds C-Beam Linear Actuator](https://i.ytimg.com/vi/DpISoryx1ys/default.jpg)
![Slicing Book Matched Guitar Sides and Backs - Part 3 - Production of Guitar Backs- Luthier Tip (109)](https://i.ytimg.com/vi/dk_Mv9BP_kU/default.jpg)
![Automation of the Accu-Slice - Part 2 - Limit Switches, Electronics Console & Software (130)](https://i.ytimg.com/vi/fPc_z4tR7JA/default.jpg)