Building the Flight Controller Hardware - dRehmFlight VTOL
This video will show you how to setup and solder the default recommended hardware setup for the dRehmFlight VTOL flight controller package. This hardware configuration will work with the stock code which supports 6 ESC outputs using OneShot125 protocol, and 7 servos or ESC outputs using conventional PWM. It will also accept 6 channel PWM, PPM, or SBUS receiver inputs.
Download the Code and Documentation: https://github.com/nickrehm/dRehmFlight
RcGroups Support Thread: https://www.rcgroups.com/forums/showthread.php?3706571-dRehmFlight-VTOL-Teensy-Flight-Controller-and-Stabilization
Parts I used for this build (these are Amazon Affiliate links; by purchasing from these, I receive a small portion of the revenue at no cost to you):
Teensy 4.0: https://amzn.to/3iIi7HN
GY-521 IMU: https://amzn.to/3edF1Vn
Angled Pin Headers: https://amzn.to/32HnCRL
Straight Pin Headers: https://amzn.to/2RAJTdp
22 AWG Silicone Wire: https://amzn.to/2HbZpur
Shrink Tubing: https://amzn.to/3cclW5U
While this hardware configuration is simple, it is not the only way to solder up the Teensy for use with the dRehmFlight VTOL code. It is merely a starting point. The complete documentation shows you how to modify the pin selection for your specific hardware configuration, which can then be soldered on to a prototyping board or your own PCB design for a more professional build. As with all things having to do with this project, I encourage you to get creative and find what works best for you. The default code and hardware is just a starting point!
#dRehmFlight #VTOL #FlightController
Видео Building the Flight Controller Hardware - dRehmFlight VTOL канала Nicholas Rehm
Download the Code and Documentation: https://github.com/nickrehm/dRehmFlight
RcGroups Support Thread: https://www.rcgroups.com/forums/showthread.php?3706571-dRehmFlight-VTOL-Teensy-Flight-Controller-and-Stabilization
Parts I used for this build (these are Amazon Affiliate links; by purchasing from these, I receive a small portion of the revenue at no cost to you):
Teensy 4.0: https://amzn.to/3iIi7HN
GY-521 IMU: https://amzn.to/3edF1Vn
Angled Pin Headers: https://amzn.to/32HnCRL
Straight Pin Headers: https://amzn.to/2RAJTdp
22 AWG Silicone Wire: https://amzn.to/2HbZpur
Shrink Tubing: https://amzn.to/3cclW5U
While this hardware configuration is simple, it is not the only way to solder up the Teensy for use with the dRehmFlight VTOL code. It is merely a starting point. The complete documentation shows you how to modify the pin selection for your specific hardware configuration, which can then be soldered on to a prototyping board or your own PCB design for a more professional build. As with all things having to do with this project, I encourage you to get creative and find what works best for you. The default code and hardware is just a starting point!
#dRehmFlight #VTOL #FlightController
Видео Building the Flight Controller Hardware - dRehmFlight VTOL канала Nicholas Rehm
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Setting Up Your Radio Connection - dRehmFlight VTOLHow the Flight Controller Code Works - dRehmFlight VTOLGetting Started With Teensy 4.0The Spinning Drone ParadoxThe astounding athletic power of quadcopters | Raffaello D'AndreaMounting and Configuring the IMU - dRehmFlight VTOLThe Difference Between a Drone Flight Controller and Flight ComputerThe "Monolith", a Teensy-Powered Interactive Synthesizer!Making an INSANE Hovering RC F-35 VTOL JetRadio Controlled SpaceX StarhopperBUILT HELICOPTER FROM RUSTdRehmFlight VTOL - Teensy (Arduino) Flight Controller and StabilizationGetting Started with the Teensy Microcontroller PlatformBest Betaflight FC for people with no laptop | SPEEDYBEE F7 V2 STACKEasy & Powerful Arduino Alternative? #3 Teensy Beginner's GuideVTOL Building Tips with Ben from 3DXREmbedded Programming for QuadcoptersVTOL F-35 RC Plane Build Video Part -1| #VTOL #F-35 #RCPLANE #Dhrm #rcplanebuild #diydot3dCycloidal Rotor Airplane: The Cycloplane