049 Sliding dovetail planes 2.0 part 3

Hello! This is the last part of my sliding dovetail planes project. The planes will work in pairs - left plane and right plane for booth directions of cutting.

If you didn't seen 1 and 2 part of the video just check it here:
Part 1 - https://www.youtube.com/watch?v=CSb__tEZslo&t=2s
Part 2 - https://www.youtube.com/watch?v=-ee50RGrpl4
Every step is decsribed on the timeline so you can easly read what i'm doing in any moment of the video.

As i wrote at the end one pair is for sale.
To take a part just go to my instagram profile. There will be auction-post with all the rules in the description. The end of the auction 14.05.2021.
If you like the video just leave a comment or thumb :)
Thank you for spending some time on my channel.

Cheers!
BTW. I don't take orders and usually i don't sell my planes.
The most sure way to get some of them is take a part in giveaways for my supporters.
For support click here:
https://www.youtube.com/channel/UCPWTutgaoHuQcovRSjyeFOA/join

or use my PayPal account: esortodox@gmail(dot)com
Big thanks for my supporters!
ANDREW DAWSON
JOSHUA LUCAS
ROSS TOMAZIN
RENE POLAK
LUBOS SULC
RAMINGR
SCOTT MARTIN
BRIAN NEWTON
ŁUKASZ JASIŃSKI
MIKE ETHERINGTON
MELINDA JOHNSON
SOTIRIS ZACHAROPOULOS
ARTUR PIETREK
WILLIAM C ALLEN
PATRYK MIKOŁAJCZAK
MACIEK ŁASZCZ
ALLEN MOCK MD
ANDIEJOY
PAWEŁ CUDNOCH
WORKLION
WILL CLINGON
ADAM SLOMKOWSKI
SLOMKAADAS
PMEWUK
VLADIMIR EPIFANOV
MU YI YUN
PAWEŁ KNAPIK
EDWARD FASSLER
PATRICK KONSOR
BILLY VICKERY
WALTER GRUBE
ŁUKASZ CZYŻYKOWSKI
....................................................................................................
For more check my instagram profile:
https://www.instagram.com/stavros_gakos
Remember to subscribe my buddy, Łukasz Giergasz
(with engilsh subtitles)
Click here:
https://www.youtube.com/watch?v=GyfxV8Bgu9U&t=0s
Plane irons and nickers after laser CNC cutting: (0:00)
After laser cutting the edges of steel are preety hard: (0:14)
Anneling makes them softer: (0:39)
Preparing the nickers: (1:19)
Cutting the slots for the nickers: (2:30)
The nicker after grinding the bevel: (6:13)
Hardening the nickers: (6:19)
Tempering: (6:58)
Sandblasting: (7:04)
Bluening with Presto Mag: (7:20)
Flattening the nicker back: (7:37)
Polishing the nicker back on the strop: (7:59)
Preparing the plane irons: (8:18)
Hardening the plane irons: (14:07)
Tempering: (15:30)
The plane iron after hardening and tempering: (15:38)
The plane iron after sandblasting: (15:52)
The plane iron after bluening: (16:16)
Making the wedges: (16:33)
The plane iron after sharpening: (19:17)
The finish - Antique oil: (19:38)
Presentation: (19:42)

Видео 049 Sliding dovetail planes 2.0 part 3 канала Stavros Gakos