044 Shooting plane - building process with hand tools
As i told in the begining of the video i'm gonna build a shooting plane.
The desing is inspired by two shooting planes, which i saw on Bill Carter site and Jeremiah Wilding Instagram profile.
http://www.billcarterwoodworkingplanemaker.co.uk/rare-planes/
https://www.instagram.com/p/Bu-H_EegB85/?igshid=1g1ktslqqe2uf
I hope you will like this project :) Now it's time for new shooting board, or maybe shooting bench?? Who knows.. :)
The materials:
4mm thick steel plates
screws
quartersawn beech
Ferdinand Rubens plane iron
boiled linseed oil
shellac orange
Big thanks for my patrons!
ANDREW DAWSON
JOSHUA LUCAS
ROSS TOMAZIN
JAVIER QUINTANA
RENE POLAK
LUBOS SULC
RAMINGR
JACEK WAWER
SCOTT MARTIN
BRIAN NEWTON
IVAN AMON
BTW. I don't take orders and usually don't sell my planes. The only way to get some of them is take a part in giveaways for my supporters.
For support click here:
https://www.youtube.com/channel/UCPWTutgaoHuQcovRSjyeFOA/join
or use my PayPal account: esortodox@gmail(dot)com
Thank you!
....................................................................................................
For more check my instagram profile:
https://www.instagram.com/stavros_gakos
Remember to subscribe my buddy, Łukasz Giergasz
Click here:
https://www.youtube.com/watch?v=aDaHvxpWeeI
Bla bla bla: (0:00)
Presentation of the materials: (0:54)
Smoothing the edges of steel parts: (01:06)
Drawing lines to determine holes places: (01:26)
Punching: (01:45)
The screws: (01:55)
Drilling holes in steel parts: (02:20)
The flatness: (03:06)
Marking holes for the screws: (03:13)
Drillng holes for the screws: (03:58)
Drilling wider holes for the screw neck: (04:07)
Screwing the screws: (04:19)
Square check: (05:04)
Drawing all the angles: (05:10)
Throat chiseling: (07:40)
The birth of the mouth: (09:17)
Pairing the cheeks: (09:38)
Sharpening the edge float: (09:57)
Determinig the bed: (10:05)
Removing the waste: (10:32)
Paring the front of the throat (wear angle): (10:54)
Sawing abutments: (11:08)
Removing the waste: (11:39)
Flattening the bed: (12:17)
Widening the thtoat: (12:51)
Making the eyes: (14:28)
Scribing the mouth inside: (14:45)
Drilling and cutting the mouth in steel plate: (15:09)
Filing the mouth: (15:48)
Fitting the blade: (16:29)
Filing the corners: (18:14)
Filing to the wear angle: (18:31)
Making the wedge: (18:39)
Making chamfers: (19:37)
Adding more screws: (20:07)
Presentation of sharpened iron: (20:24)
Presentation of closed mouth: (20:37)
Shellac time: (20:43)
The plane after one coat of blo and few coats of shellac: (20:55)
Tiny chamfer on the holes: (21:24)
Preventing from scratches: (21:42)
Filing down the screw head: (21:49)
Filling the chamfer on the holes: (22:00)
Flattening the steel plates: (22:18)
Checking the mouth: (23:26)
Scribing parallel mouth to the cutting edge: (23:57)
Final opening of the mouth: (24:13)
Checking the mouth: (24:32)
Testing: (24:53)
Видео 044 Shooting plane - building process with hand tools канала Stavros Gakos
The desing is inspired by two shooting planes, which i saw on Bill Carter site and Jeremiah Wilding Instagram profile.
http://www.billcarterwoodworkingplanemaker.co.uk/rare-planes/
https://www.instagram.com/p/Bu-H_EegB85/?igshid=1g1ktslqqe2uf
I hope you will like this project :) Now it's time for new shooting board, or maybe shooting bench?? Who knows.. :)
The materials:
4mm thick steel plates
screws
quartersawn beech
Ferdinand Rubens plane iron
boiled linseed oil
shellac orange
Big thanks for my patrons!
ANDREW DAWSON
JOSHUA LUCAS
ROSS TOMAZIN
JAVIER QUINTANA
RENE POLAK
LUBOS SULC
RAMINGR
JACEK WAWER
SCOTT MARTIN
BRIAN NEWTON
IVAN AMON
BTW. I don't take orders and usually don't sell my planes. The only way to get some of them is take a part in giveaways for my supporters.
For support click here:
https://www.youtube.com/channel/UCPWTutgaoHuQcovRSjyeFOA/join
or use my PayPal account: esortodox@gmail(dot)com
Thank you!
....................................................................................................
For more check my instagram profile:
https://www.instagram.com/stavros_gakos
Remember to subscribe my buddy, Łukasz Giergasz
Click here:
https://www.youtube.com/watch?v=aDaHvxpWeeI
Bla bla bla: (0:00)
Presentation of the materials: (0:54)
Smoothing the edges of steel parts: (01:06)
Drawing lines to determine holes places: (01:26)
Punching: (01:45)
The screws: (01:55)
Drilling holes in steel parts: (02:20)
The flatness: (03:06)
Marking holes for the screws: (03:13)
Drillng holes for the screws: (03:58)
Drilling wider holes for the screw neck: (04:07)
Screwing the screws: (04:19)
Square check: (05:04)
Drawing all the angles: (05:10)
Throat chiseling: (07:40)
The birth of the mouth: (09:17)
Pairing the cheeks: (09:38)
Sharpening the edge float: (09:57)
Determinig the bed: (10:05)
Removing the waste: (10:32)
Paring the front of the throat (wear angle): (10:54)
Sawing abutments: (11:08)
Removing the waste: (11:39)
Flattening the bed: (12:17)
Widening the thtoat: (12:51)
Making the eyes: (14:28)
Scribing the mouth inside: (14:45)
Drilling and cutting the mouth in steel plate: (15:09)
Filing the mouth: (15:48)
Fitting the blade: (16:29)
Filing the corners: (18:14)
Filing to the wear angle: (18:31)
Making the wedge: (18:39)
Making chamfers: (19:37)
Adding more screws: (20:07)
Presentation of sharpened iron: (20:24)
Presentation of closed mouth: (20:37)
Shellac time: (20:43)
The plane after one coat of blo and few coats of shellac: (20:55)
Tiny chamfer on the holes: (21:24)
Preventing from scratches: (21:42)
Filing down the screw head: (21:49)
Filling the chamfer on the holes: (22:00)
Flattening the steel plates: (22:18)
Checking the mouth: (23:26)
Scribing parallel mouth to the cutting edge: (23:57)
Final opening of the mouth: (24:13)
Checking the mouth: (24:32)
Testing: (24:53)
Видео 044 Shooting plane - building process with hand tools канала Stavros Gakos
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
025 Panel raising plane - building process / woodworking042 Shop stoolDovetail TomahawkWoodworking Tools That Are At Another Level ▶4Byzantine Sundial-Calendar '1000 Hrs' Mega EditSetting Up a Japanese Plane "鉋 Kanna"Не трать деньги на струбцины! Смотри как их сделать! 4 варианта!!!045 It's GIVEAWAY time!Making an Octagonal Toolbox - (Day 6) 7 Scrapwood Challenges in 7 Days - ep48Restoring an Ancient Barn Roof | Part 3【Cost of $ 200 or less】 Aluminum frame circular saw slide guideI Remake An Odd 1878 Hand Plane Chisel Patent [Resurrection]Making Magnetic Machine for plasma cutting010 Tail vise for my woodworking workbench. TOOLMAKE19037 Badger plane - hand woodworkingI Bought a Flip Clock & Upgraded it - (Day4) 7 Scrapwood Challenges in 7 Days - ep46Walnut CabinetAntique wooden sled from 1940 - RestorationMaking a folding spindle moulder fence