Silicone Rubber Cut Molds
Cutting open silicone rubber molds can be intimidating. I’ll show you some things you can do to make it easier.
SKIP TO THE GOOD PARTS:
00:00 You’re afraid of cut molds!
00:50 Start with the base.
01:05 Holes are a problem.
01:44 How to cut a hole.
02:08 Defining the cutting line on the base.
02:35 Dealing with a hollow base.
03:08 Cap the base.
04:50 Blocks of rubber are intimidating.
05:30 Plan the parting lines using your phone.
07:30 What are normals? And why do they matter?
08:05 Cutting to a surface correctly.
09:15 Cutting our model properly.
10:40 Your model is too complicated!
11:05 Take the model apart.
11:40 Thanks for watching!
Видео Silicone Rubber Cut Molds канала Robert Tolone
SKIP TO THE GOOD PARTS:
00:00 You’re afraid of cut molds!
00:50 Start with the base.
01:05 Holes are a problem.
01:44 How to cut a hole.
02:08 Defining the cutting line on the base.
02:35 Dealing with a hollow base.
03:08 Cap the base.
04:50 Blocks of rubber are intimidating.
05:30 Plan the parting lines using your phone.
07:30 What are normals? And why do they matter?
08:05 Cutting to a surface correctly.
09:15 Cutting our model properly.
10:40 Your model is too complicated!
11:05 Take the model apart.
11:40 Thanks for watching!
Видео Silicone Rubber Cut Molds канала Robert Tolone
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Molding A Bobblehead in Silicone Rubber. Part 1.](https://i.ytimg.com/vi/Gbo7jlWTO2o/default.jpg)
![Cartoon In Silicone Rubber And Urethane Resin](https://i.ytimg.com/vi/4fHklRwXJPY/default.jpg)
![Pressure Casting Resin On Wood](https://i.ytimg.com/vi/xssToge2pWo/default.jpg)
![Pouring A Silicone Rubber Blanket Mold - 7 Tips And Tricks](https://i.ytimg.com/vi/-Fv0Dg631Ew/default.jpg)
![Molding And Casting A Four-Legged Creature - Part 1](https://i.ytimg.com/vi/9Mot5-gt0OM/default.jpg)
![](https://i.ytimg.com/vi/XxrWre_5YFY/default.jpg)
![Perfect Castings From A Silicone Rubber Mold](https://i.ytimg.com/vi/xmr0wpKx7_U/default.jpg)
![Molding And Casting A Four Legged Creature - Part 3](https://i.ytimg.com/vi/8X4Y-qR6BEA/default.jpg)
![Pouring A Rubber Blanket 1-Piece Cut Mold.](https://i.ytimg.com/vi/Nvl7JD69MzY/default.jpg)
![150 Urethane Resin Castings - How To Make A LOT of copies fast!](https://i.ytimg.com/vi/TOFZsPmJI2E/default.jpg)
![Molding, Casting And Painting A Resin Sculpture](https://i.ytimg.com/vi/apyI1q511iw/default.jpg)
![With A 1-Piece Silicone Cut Mold](https://i.ytimg.com/vi/LnhOl7yB5mk/default.jpg)
![Setting Up A Small Shop!](https://i.ytimg.com/vi/FKu4yho5W9A/default.jpg)
![In Resin Casting Size Matters](https://i.ytimg.com/vi/Yx4GnNRyllA/default.jpg)
![Rotocasting Small Parts In Urethane Resin](https://i.ytimg.com/vi/lZlENc3nuoM/default.jpg)
![Mold Making With Glove Mold Process](https://i.ytimg.com/vi/FJ5q0sZgcx8/default.jpg)
![Making A Silicone Rubber Mold](https://i.ytimg.com/vi/-MyFiPegoqc/default.jpg)
![Making a Silicone Lay Up Mold](https://i.ytimg.com/vi/lLtUFN0KAEg/default.jpg)
![Silicone Rubber Cut Molds: Faster, Cheaper and SO MUCH BETTER.](https://i.ytimg.com/vi/Rw1NzWHwqH8/default.jpg)
![Silicone Mold Making: When To Use A Two-Piece Mold. Part 1](https://i.ytimg.com/vi/wDLWaWZwNm8/default.jpg)