Restoration Rusty Machete
Hello folks! Today I want to show you my new machete restoration project. I found this rusty machete at a flea market. Probably, it was made at the factory when. The steel is good, but the work is rough and there is no balance in the machete. Well, let's start the restoration.
0:00 Review
0:28 Handle remove
1:17 Rust remover
1:33 Washing
1:51 Drying and oiling
2:07 Cleaning and correction surface
2:32 Contour correction
2:58 Handle holes
3:19 Bevels
3:49 Sanding the surface
4:07 Handle
5:57 Gluing
6:29 Handle processing
6:57 Impregnated and etching
7:16 Leather sheath
10:48 Sharpening
11:09 Final review
11:56 Test
14:08 I eat
As usual I used rust remover liquid, washed and dried it. Then I cleaned the surface of the machete via sanding machine. After I used files to correct the contours of machete. Via beltgrinder machine, I made bevels, and then I used sandpaper to polish the cutting edge.
After all correction, I polished bit the surface of the machete and started to make the handle. For the wood handle, I chose a very strong and dry piece of redwood. For rivets, I used brass and aluminum. For wood handle impregnation I used handmade wax. Also, I made a leather machete sheath and as usual made an interesting test for you in the wood. I hope, you will enjoy this restoration video.
#screwsandtools #machete #restoration
Видео Restoration Rusty Machete канала Screws And Tools
0:00 Review
0:28 Handle remove
1:17 Rust remover
1:33 Washing
1:51 Drying and oiling
2:07 Cleaning and correction surface
2:32 Contour correction
2:58 Handle holes
3:19 Bevels
3:49 Sanding the surface
4:07 Handle
5:57 Gluing
6:29 Handle processing
6:57 Impregnated and etching
7:16 Leather sheath
10:48 Sharpening
11:09 Final review
11:56 Test
14:08 I eat
As usual I used rust remover liquid, washed and dried it. Then I cleaned the surface of the machete via sanding machine. After I used files to correct the contours of machete. Via beltgrinder machine, I made bevels, and then I used sandpaper to polish the cutting edge.
After all correction, I polished bit the surface of the machete and started to make the handle. For the wood handle, I chose a very strong and dry piece of redwood. For rivets, I used brass and aluminum. For wood handle impregnation I used handmade wax. Also, I made a leather machete sheath and as usual made an interesting test for you in the wood. I hope, you will enjoy this restoration video.
#screwsandtools #machete #restoration
Видео Restoration Rusty Machete канала Screws And Tools
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Restoration Rusty Handmade Giant KnifeRusty Axe Restoration. FarmCraft101Restauración de antiguo sable de la marina españolaRestoration Rusty Axe Strange ShapePERFECT Abandoned Billhook Restoration | Antique Machete RestoreRestoration of Old Crusty Machete Covered in Rust.Restoration Antique Caucasian Shashka SwordRestoration Antique Russian KnifeRusty Antique US Pilot Knife - KA-BAR RestorationRusty US Pilot Knife 1960’s RestorationRestoring a Piece of History - Random HandsRestoration Soviet Axe Multi ToolRusty 1960's Knife Restoration - Awesome DaggerRestoration Old Rusty Butcher CleaverCLEAVER KNİFE RESTORATİON - Axe makingRestoration Rusty Old BillhookWW2 Folding Machete restoration.Turn A 2€ Rusty Knife Into High-End Japanese Chef's KnifeRestoration Rusty Hunting Axe