HowTo Build A BIG Stirling Engine From Cans DIY

DIY Build A BIG Stirling Engine From Cans. I build a very big LTD stirling engine from cans. https://www.rockntv1.com/2019/05/big-ltd-stirling-engine-high-temp-parts.html I melt aluminum cans to pour molten metal into tin can mould casting for the power piston. Turn the diy cast piston on my logan lathe. Trepan cut, face groove, the hot and cold end plates of the displacer cylinder on the 40939 mill to fit the glass cylinder body. Bore copper tubing and steel pipe on the lathe for the homemade power piston cylinder. Then upgrade the aluminum piston to one made of cast iron. This large size homemade ltd stirling engine is water cooled a runs approximately 800 rpm with the cold side at 110f , hot side 325f. It has a cast iron flywheel of 10” and 5lbs or a 18” bicycle wheel. DIY stationary engine

Видео HowTo Build A BIG Stirling Engine From Cans DIY канала ROCKNTV1