How to Build a Hot Tub with FULL INSTRUCTIONS

This video will show you how to build a Wooden Hot Tub. The video is quite long, but should give you all the info you need to build a Hot Tub yourself without any need to visit another website or pay for plans. Everything you need is right here. Thanks for watching and good luck with your build.
NOTE: Not all measurements and conversions in this video, nor the information below, are exact.
Below are links to most of the Tools and Tool Accessories used in the video:

●●►All Router Bits: https://www.amazon.com/shop/toolsstuff?listId=21Z1NVINWVZEG&tag=aiponsite-20&linkCode=ic5
●●► All other Hot Tub Stuff: https://www.amazon.com/shop/toolsstuff?listId=25SB6FL0OY3DA

◘◘◘►My Full Tool Shop: https://www.amazon.com/shop/toolsstuff ◄◘◘◘

The Timber you will need to build a Hot Tub this size (approx 1600mm or 5 foot):
█ Hot Tub Base - 140mm x 32mm up to 1700mm long x 15 lengths. (5.5" x 1.25", 67" long) &
65mm x 45mm, 1600mm long x 4 & 115mm x 19mm, 1600mm long.
█ Hot Tub Staves (Sides) - 50 x (115mm x 32mm x 1250mm) + Spares of knot free stable timber, preferably not pine, not sap wood, not resinous wood, not wet wood. 4.5" x 1.25" x 49"
█ Hot Tub Bands (Straps) - 7 x 50mm wide straps cut from a 1220mm x 2440mm (4ft x 8ft) sheet of 2mm (14 gauge) thick Stainless Steel with a brushed finish

◘◘◘►My Tool Shop: https://www.amazon.com/shop/toolsstuff ◄◘◘◘

Remember... You CAN make a Hot Tub out of something other than cedar.

The Base 3:00
The Staves 17:55
The Bands 28:15
The Assembly 37:47

#HotTub
#HowToBuildaHOTTUB
#ToolsandStuff
#BuildsandStuff
#HomemadeHotTub
#DIYHotTub

Видео How to Build a Hot Tub with FULL INSTRUCTIONS канала Tools & Stuff