DIY Hot Tub

A scratch built fibreglass Hot Tub!

Composites materials list:
www.polyfibre.co.uk

NB we accidentally over ordered the resin and fibreglass matt by a factor of about 50%!

1.       2 x 5kg ISO/NPG Gelcoat heat and chemically resistant.
2.       10m² ECR glass tissue.
3.       33.0kg (55m²) 600grm C.S.M.
4.       3 x 25kg Isopthalic resin, heat and chemically resistant.
5.       2kg Catalyst (hardener).
6.       1 x 80ml dispenser.
7.       1 x 6” x 7/8” paddle roller.
8.       1 x 5ltr Acetone.
9.       1 x 0.5kg release wax.
10.   1 x 1ltr PVA.
11.   1 x 5ltr Primecoat.
12.   5 x 5ltr buckets.
13.   2 x 6” polyester rollers.
14.   10m² Peel Ply.

Plumbing/parts list:
www.poolandspacentre.co.uk

GS100 pack.
Waterway 50sq ft In-line Filter Assembly
Waterway 3.5" Waterway Front Access Light Kit
Balboa VL200 Topside Control Panel with Overlay
GS100 heater assembly
WP200 (2hp) - two speed pump
Waterway Threaded Mini Storm Jet Body x8
Waterway 3" Mini Storm Directional Jet - Stainless Steel - x8
Waterway 1 x 2"female inlet + Dead End with 2 x 3/4" barbs
Waterway 1 x 2"female inlets with 6 x 3/4"barb outlets
Waterway 2" Suction Assembly - 200GPM (White)
Flexible Pipe (2 inch) 5m
Flexible Pipe (3/4 inch) 10m
4x 90 Degree Elbow - Plain Female/Female 2"
2x 45 Degree Elbow - Plain Female/Female 2"
2x Gate Valves (2")
3x Coupling (2" Coupling)
8x Waterway Spiggot Plug (3/8")
Pipe Clamps - stainless steel (3/4") x 16
Reducer (2" x 1 1/2" Reducer - Plain) x 2
Plastic Pipe Cement (240 ml)

Видео DIY Hot Tub канала Maple Fever