How to Install In Floor Heat in a Workshop

HOW TO INSTALL IN-FLOOR HEAT IN A WORKSHOP. This video shows how I prepped the pole barn floor for in-floor heat. I used 2" Owens Corning Foamular 250 pink foam board. I used a piece 24" wide along the perimeter of the barn then covered the floor.

The PEX tubing is NIBCO brand from Menard's. NIBCO offers quotes and layout service on their website at www.nibco.com
For my barn of 1500 square feet they recommend 5 rolls of 300' 1/2" PEX.

I may have messed up and because I only used 3 rolls. I will have R-25 insulation in the walls and R-38 in the ceiling and plan on keeping the temperature around 55-60 degrees throughout the winter. I hope this system will still work and as soon as I put it in service I will post another video.

Here's a link to the manifold I plan on using:
https://amzn.to/2CZdeYL

Here's a link to the Bosch drill/driver I use:
https://amzn.to/2CZkWSD

The above links are Amazon affiliate links.

Please Subscribe: https://goo.gl/nPKej8

Follow us:
Instagram: https://www.instagram.com/countryfamilylife
Facebook: https://www.facebook.com/CountryFamilyLife/

Видео How to Install In Floor Heat in a Workshop канала Country Family Homestead