Making Latex Puppet Shoes
This is using basic slush casting with liquid latex to make hollow, flexible shoes for stop motion puppets. I cheat and sculpt one shoe for both left and right - the puppets don't seem to mind. Ordinary casting plaster will do, but I used Hydrostone. Many props can be made by casting in liquid latex. Be sure to use mould release - clay and water works well - on the flange of the mould, where plaster meets plaster, but not on the inside - the plaster needs to absorb the moisture out of the latex so it leaves a thickened skin on the surface.
Thanks to Kevin MacLeod for the music, from his Incompetech site. This piece is Padanaya Blokov.
Видео Making Latex Puppet Shoes канала StopmoNick
Thanks to Kevin MacLeod for the music, from his Incompetech site. This piece is Padanaya Blokov.
Видео Making Latex Puppet Shoes канала StopmoNick
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Making silicone puppet headStop Motion Studio on iPadCast your models with latex moldsMake a Buildup PuppetFaery Cakes with Baba GanushkaPeter Jackson's Original King Kong Stop-Motion ArmatureKnifeTestPal.movHow to make a shoe mold with silicone rubberCasting A Resin Positive From An Alginate MoldStop Motion Tutorial: Dressed for SuccessSinbadSkeletonFightHDMaking Latex Build-Up Puppet Head[Stop motion] How to make a Puppet | Wire Armature & Wool felt BodyLaBambaPalSound.movFirst Time Sneaker Casting! Making Silicone Mold from a Vans Sneaker!Ink In MotionLet’s Build: Blinking Puppet Eyes (Part 1)How to Build a Simple 3D Printed Arduino Animatronic Eye MechanismMakeDragonHeadH264.mov