DIY Piston Pump for Dispenser

Liquid soap dispenser based on this pump: https://youtu.be/aZYFfANhMNY

I decided to make an automatic liquid dispenser. But as soon as it came to the pump, it immediately became clear that a centrifugal pump was not suitable for this task. The manufacture of the piston pump took a long time, and I decided to shoot a separate video for this project. In just two days, I was able to cut this video from 10 minutes to 4 minutes. :)

List of materials used in this project:
1. Motor with reducer - 1 piece.
2. Electrical connector - 1 pc.
3. Syringe - 5 pcs.
4. Tube from the dropper - 1m
5. Rubber sheet S = 0.7mm
6. Roofing sheet - S = 0.35mm
7. Steel bar Ø1.3mm - 92mm
8. Steel rod Ø1.5mm - 40mm
9. Hairpin М3х30mm - 1pc.
10. Hairpin М3х45mm - 1pc.
11. Screw М1.6х4mm - 2 pcs.
12. Locking screw М3х4mm - 1pc.
13. Screw М3х8mm ¬– 2 pcs.
14. Nut M3 - 5 pcs.
15. Washer M3 - 6 pcs.
16. Spring washer - 6 pcs.

Drawings of some parts and assembly units: https://oldoctober.com/pics/diy3/piston_pamp/piston_pump-en.pdf

#pump #dispenser

Видео DIY Piston Pump for Dispenser канала Iuri's Workshop