Tube Amplifier Tone Stacks: Part 1
This is Part 1 of a two-part video series discussing (in very basic language) virtually all aspects of tube amplifier (passive) tone controls. Topics covered: 1.) The differences between active and passive tone controls 2.) Different locations for tone controls within the amp circuit, including benefits and drawbacks of each 3.) The use of a cathode follower to match impedance between circuit and tone stack 4.) Capacitor theory regarding AC/DC response and frequency passage 5.) High Pass and Low Pass Filters....design and function.
This series is in response to numerous requests and is best suited for those who seek a basic understanding of amplifier design and function. The tone is conversational and, as usual, relies upon simple language, analogies, and explanations. In addition, Rusty makes a couple of appearances and his nemesis, the Cat, is offered his job behind the camera......with somewhat predictable results :)
If you enjoy videos featuring classic vintage tube amplifiers, jukeboxes, home-built electronic marvels, and basic, understandable technical presentations, then please subscribe to my channel. You will receive immediate access to about 100 videos and, if you activate the feature, you will be notified each time a new video is posted. Thanks for watching !!!
Видео Tube Amplifier Tone Stacks: Part 1 канала Uncle Doug
This series is in response to numerous requests and is best suited for those who seek a basic understanding of amplifier design and function. The tone is conversational and, as usual, relies upon simple language, analogies, and explanations. In addition, Rusty makes a couple of appearances and his nemesis, the Cat, is offered his job behind the camera......with somewhat predictable results :)
If you enjoy videos featuring classic vintage tube amplifiers, jukeboxes, home-built electronic marvels, and basic, understandable technical presentations, then please subscribe to my channel. You will receive immediate access to about 100 videos and, if you activate the feature, you will be notified each time a new video is posted. Thanks for watching !!!
Видео Tube Amplifier Tone Stacks: Part 1 канала Uncle Doug
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Tube Amplifier Tone Stacks: Part 2Phase Inverters....for the Common ManMad Scientist Lab The 12AX7 Cathode FollowerHow to Build a Classic Valve Guitar Amp (based on the Tweed Princeton)Resistors, Part 1: Their Circuit Function & Practical Applications of Ohm's LawLet's get nerdy: 3 types of tone control circuits & how they work1951 Fender 5A3 Tweed Deluxe in Great ConditionImpedance Ratio: The Easiest Way to Decipher Output TransformersLet's design an build a vacuum tube amplifier from scratchConversion of a PCB Amp Circuit to Point-to-Point: Fender Champ 600 to 5F11967 Marshall JMP-50 Model 1987 Plexi Lead Amplifier: Tube Rectified and Terrific !!Guitar Amp Vacuum Tubes Part 1: Triodes and TetrodesCathode Bypass Capacitors: How they Affect Gain and ToneHow Tube Amplifiers Work, Part 1: The Power Supply1963 Brownface Fender 6G3 Deluxe......An Absolute Beauty, in for RepairsBuilding the “James” TonestackTone StacksPower Transformers: Basic Design and FunctionDIY Guitar Amplifier Marshall JCM800 1Watt