Midas Pro 3 - Introduction (1 of 8)
In this video I show the installation of I/O card into a Midas Pro 3 surface, connect the surface with the DL 371 DSP engine with CAT 6a cables, and connect the DSP engine to the DL 251 stage IO and DN 9650 Network Bridge. I then demonstrate how to configure these devices on the the Surface and go over the Diagnostics screen.
Видео Midas Pro 3 - Introduction (1 of 8) канала AVdude
Видео Midas Pro 3 - Introduction (1 of 8) канала AVdude
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
PRO X on Tour with Machine Head and Steve Lagudi - Video Series Part 1 - System OverviewFront of House sound for „The Prodigy“ with Jon Burton, d&b audiotechnik, Midas ConsolesMidas Pro 3 - Patching (2 of 8)Live Stream on X32 with Separate Mix on an AUX BUS | How To Setup Start To FinishFROG LEAP STUDIOS 2.0 TOURPart 7 | Testing Via The Oscillator/Pulling Channels 25-48: Midas Heritage 2000 Console Restoration► Table de Mixage Yamaha QL5 | Préparation pour un Concert avec Adrien RoyInterview with Metallica's FoH legend Big Mick Hughes • WorldWired TourMixing on Midas Pro9 // Louis Cressy Band - Good TimeUsing a MIXING DESK - the basics and what you need to know.Rob Zombie FOH Engineer Joel Lonky on the Midas Pro 9 and Waves Software | UniqueSquared.comEd Sheeran "Divide" Tour 2018: Sound System Design and FoH sound for his support Jamie LawsonHEAT: Dave Hill and the Art of Analog EmulationMIDAS M32 Firmware V3.0 Facebook BroadcastMidas Pro 3 - Input Strip (3 of 8)Patching - Midas Master Class Series - ProX with Steve LagudiMidas Pro2c In-Depth Console TourVirtual Sound Check with Midas Pro 3 + Klark Teknik DN9650 over DanteMIDAS Training: PRO2 at Front of House Part 1 of 2MIDAS CMDU - Preferences 2 of 6 - Show Page