Infinity BBQ Grill Control Valve Replacement With Ignition.

Grill-Repair.com
954-2-GRILL-2
http://www.grill-repair.com/blog/2016/infinity-grill-control-valve-replacement-video

This repair video was shot with an Infinity barbecue grill model. Infinity made a nice grill but the company only lasted a few years. Fortunately they copied the design of some of the great grill manufacturers so the BBQ parts are easy to locate once the grills are identified.

The control valve in an Infinity clamps onto the manifold pipe which should be cleaned once in awhile. The valve unclamps and the gasket between the valve body and the manifold pipe needs to be replaced. When the control valves are damaged it is fairly simple to remove the clamp-on control valve, clean the manifold area and instal the new valve.

These control valves have a microswitch controller that functions as an automatic momentary switch in the ignition system assembly.
As the control knob is slightly pressed-in so the valve stem will turn on/off and high/low, pressing in the stem causes the micro-switch circuit to close which means the ignitor electrode sparks and keeps sparking until after the knob is released.

Inside the Infinity control panel it is possible to run the igniter module wires to a single switch or button but the barbeque grills come standard with these micro-switch connections which makes the ignitors seem to spark when they are needed, like magic.

This video simply shows that the replacement control valve is slightly different from the original Infinity control valve but also shows that the new valve fits perfectly to replace and repair the control valve for the burner and the ignition switch.

Grill-Repair.com
954-2-GRILL-2
http://www.grill-repair.com/blog/2016/infinity-grill-control-valve-replacement-video

Видео Infinity BBQ Grill Control Valve Replacement With Ignition. канала jason broderick