Tutorial Ep 2 of 2 - The Top Mistakes to Try and Avoid When You Begin Building Guitars
Welcome to Crimson Guitars https://www.youtube.com/user/CrimsonCustomGuitars?sub_confirmation=1 and welcome to another tutorial from Master Luthier Ben Crowe at Crimson Guitars in the UK. http://www.crimsonguitars.com
Following on from the previous video: https://www.youtube.com/watch?v=UTgmsjg78a0, so many people commented with their own mistakes, that Ben decided to make another episode sharing more experiences.
Chapters
0:45 Learn to recognise when you are tired
1:47 Beware in attaching the wings to the neck joint if not flat
3:07 Get diamond stones
3:50 A mistake is an opportunity to learn - don't worry
4:38 Don't put a single-action truss rod in upside down - or forget to put it in
5:26 Design the whole instrument
6:31 Don't forget to install the ground wire
7:14 Don't put the body on the bench you are working on
8:29 Don't rush anything - especially the finish
9:48 Measure twice then stop and think through your measurement
11:29 Learn not to jump the gun - don't rush out and buy tools
12:31 Make sure you are following the right plans
12:51 Don't clamp without a caul on both sides
13:32 Don't lay your work on a dirty table or mat
14:28 Make sure you rout your cavities on the correct side of your work
15:07 Learn how to solder correctly
15:15 Conclusion
______________________________________________________________________
We'd like to thank our partners for helping to make this video series possible.
Triton Tools - http://www.tritontools.com/en-GB
Wagner Meters - https://www.wagnermeters.com/
ISOtunes Bluetooth Hearing Protection - http://bit.ly/36YmKro
Support us by supporting our Partners, and at the same time get yourself a great deal with ISOtunes.
Use code "CRIMSON10" for £10 off at "isotunes.co.uk" or $10 off at "isotunes.com"
Get the Freshest CA glues in the market (USA orders) at www.starbond.com
Use Code 'CRIMSONGUITAR' at checkout to save 15% off on your purchase https://www.starbond.com/?rfsn=4953733.fb5f31 ______________________________________________________________________
WEBSITE: http://www.crimsonguitars.com
Luthier’s Tools & Supplies: http://bit.ly/LuthTools
Guitar Building Courses: http://bit.ly/LuthierySchool
Kit Guitars: http://bit.ly/KitGuitars
SOCIAL
Instagram - https://www.instagram.com/crimsonguitars/
Facebook -https://www.facebook.com/Crimson CustomGuitars/
As always, thank you so much to our Patrons, who help make videos like this possible.
Patreon –https://www.patreon.com/crimsonguitars
OTHER
Ben's Vintage Tool Shop - https://vintagetoolshop.com/
Thank you again for all your support, we really appreciate it! – Ben
Stay tuned and stay awesome!
Also, Thank you to:
https://www.youtube.com/user/CountryHouseGent
https://www.youtube.com/user/gifgit
https://www.youtube.com/user/blazgrapar
https://www.youtube.com/channel/UCOo-kzrKq-_sBMJYTZfrCKw
https://www.youtube.com/channel/UC-3DX0ZZMr1fgzO3_q1Zz4A
https://www.youtube.com/channel/UC14QdBK9MMbkkKSS8MDakDg
https://www.youtube.com/channel/UCT8fmKw6SMTOMUxbUqPMJqw
https://www.youtube.com/user/Turbo2Pete
https://www.youtube.com/user/gerbutt
Please continue to tell us about your mistakes in the comments below.
Видео Tutorial Ep 2 of 2 - The Top Mistakes to Try and Avoid When You Begin Building Guitars канала Crimson Custom Guitars
Following on from the previous video: https://www.youtube.com/watch?v=UTgmsjg78a0, so many people commented with their own mistakes, that Ben decided to make another episode sharing more experiences.
Chapters
0:45 Learn to recognise when you are tired
1:47 Beware in attaching the wings to the neck joint if not flat
3:07 Get diamond stones
3:50 A mistake is an opportunity to learn - don't worry
4:38 Don't put a single-action truss rod in upside down - or forget to put it in
5:26 Design the whole instrument
6:31 Don't forget to install the ground wire
7:14 Don't put the body on the bench you are working on
8:29 Don't rush anything - especially the finish
9:48 Measure twice then stop and think through your measurement
11:29 Learn not to jump the gun - don't rush out and buy tools
12:31 Make sure you are following the right plans
12:51 Don't clamp without a caul on both sides
13:32 Don't lay your work on a dirty table or mat
14:28 Make sure you rout your cavities on the correct side of your work
15:07 Learn how to solder correctly
15:15 Conclusion
______________________________________________________________________
We'd like to thank our partners for helping to make this video series possible.
Triton Tools - http://www.tritontools.com/en-GB
Wagner Meters - https://www.wagnermeters.com/
ISOtunes Bluetooth Hearing Protection - http://bit.ly/36YmKro
Support us by supporting our Partners, and at the same time get yourself a great deal with ISOtunes.
Use code "CRIMSON10" for £10 off at "isotunes.co.uk" or $10 off at "isotunes.com"
Get the Freshest CA glues in the market (USA orders) at www.starbond.com
Use Code 'CRIMSONGUITAR' at checkout to save 15% off on your purchase https://www.starbond.com/?rfsn=4953733.fb5f31 ______________________________________________________________________
WEBSITE: http://www.crimsonguitars.com
Luthier’s Tools & Supplies: http://bit.ly/LuthTools
Guitar Building Courses: http://bit.ly/LuthierySchool
Kit Guitars: http://bit.ly/KitGuitars
SOCIAL
Instagram - https://www.instagram.com/crimsonguitars/
Facebook -https://www.facebook.com/Crimson CustomGuitars/
As always, thank you so much to our Patrons, who help make videos like this possible.
Patreon –https://www.patreon.com/crimsonguitars
OTHER
Ben's Vintage Tool Shop - https://vintagetoolshop.com/
Thank you again for all your support, we really appreciate it! – Ben
Stay tuned and stay awesome!
Also, Thank you to:
https://www.youtube.com/user/CountryHouseGent
https://www.youtube.com/user/gifgit
https://www.youtube.com/user/blazgrapar
https://www.youtube.com/channel/UCOo-kzrKq-_sBMJYTZfrCKw
https://www.youtube.com/channel/UC-3DX0ZZMr1fgzO3_q1Zz4A
https://www.youtube.com/channel/UC14QdBK9MMbkkKSS8MDakDg
https://www.youtube.com/channel/UCT8fmKw6SMTOMUxbUqPMJqw
https://www.youtube.com/user/Turbo2Pete
https://www.youtube.com/user/gerbutt
Please continue to tell us about your mistakes in the comments below.
Видео Tutorial Ep 2 of 2 - The Top Mistakes to Try and Avoid When You Begin Building Guitars канала Crimson Custom Guitars
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Top 10 (or so) Essential Tools for Building a Guitar at Home](https://i.ytimg.com/vi/vpn4qv4A1Aw/default.jpg)
![Tutorial Ep 1 of 2 - Top Mistakes to Try and Avoid When You Begin Building Guitars](https://i.ytimg.com/vi/UTgmsjg78a0/default.jpg)
![The Last Scary Sharp Tutorial You Will Need - Ben at Workshop Heaven with Matthew Platt](https://i.ytimg.com/vi/KohEPYAziGw/default.jpg)
![How to install an Amptone Lab MIDIstrip in a Parker Fly guitar](https://i.ytimg.com/vi/EHIWYiDCbwg/default.jpg)
![](https://i.ytimg.com/vi/UnrDqJoBBew/default.jpg)
![Levelling, Crowning and Dressing the Frets of a Worn PRS Guitar Fretboard](https://i.ytimg.com/vi/dBRude9l0Tg/default.jpg)
![How to Sharpen a Forstner Bit - Mini-torial 25](https://i.ytimg.com/vi/xydCcrEAYQ0/default.jpg)
![Inlay Tutorial - Multi-Piece Polar Bear (Part 1)](https://i.ytimg.com/vi/32t_am8HRUM/default.jpg)
![Making A Humbucker Pickup For An Electric Guitar](https://i.ytimg.com/vi/D2SMey-w-AU/default.jpg)
![Routing for binding on a t style guitar](https://i.ytimg.com/vi/kmJFe1qhvhw/default.jpg)
![How to Choose and Buy Good Guitar Making Wood with Ben](https://i.ytimg.com/vi/4ymmeK5xikM/default.jpg)
![Ep 5 of 8 - Triton Whetstone Sharpener - Sharpening Masterclass with Ben at Crimson Guitars](https://i.ytimg.com/vi/X6IY59Qxmg4/default.jpg)
![Masking Tape & Superglue - The Greatest Luthiers Trick of All](https://i.ytimg.com/vi/ub6PsY4cgwg/default.jpg)
![Fretting Tutorial With Christopher Owen (Part 1 of 2)](https://i.ytimg.com/vi/QOlGz9QNd3Y/default.jpg)
![The Scary Sharp System 2.0 - 3M Microfinishing Film Products](https://i.ytimg.com/vi/tvvv9K3BAA8/default.jpg)
![Ep 3 of 3 - Sygil Guitar Refurbishment - How to Polish Frets for Perfect Playability](https://i.ytimg.com/vi/Si6-zTYxhII/default.jpg)
![Experimenting With Leather Strops - What Grades / Compounds Work Best?](https://i.ytimg.com/vi/xkMvo1ZHIO4/default.jpg)
![Part 1 - Build an electric guitar with Crimson Guitars](https://i.ytimg.com/vi/CXz1vrXi-rE/default.jpg)
![How to Begin Guitar Building - Guitar Builder's Basics Podcast - Episode 196](https://i.ytimg.com/vi/2Mp-5NT1K6A/default.jpg)
![Review and demo of an HNT Gordon boutique spokeshave while carving a guitar neck](https://i.ytimg.com/vi/L8MbEsh-xOs/default.jpg)