Masking Tape & Superglue - The Greatest Luthiers Trick of All
Welcome to Crimson Guitars https://www.youtube.com/user/CrimsonCustomGuitars?sub_confirmation=1
In this episode, we have the number one luthiers tip from Ben Crowe
Most guitar builders will use double-sided tape many times throughout their week and most of them grow to loathe it!
Double-sided tape is often too strong and it is hard to separate your template and the guitar, or it is too thick and there is some give when using your bearing-cutter and router to finalize the guitar's body shape. It can also leave a sticky, hard to remove residue on your work, jig, or template and sometimes simply fails.
We have a stunningly successful double-sided tape alternative that we use at Crimson Guitars and it has replaced the use of double-sided tape and spray glues in our workshops.. watch this video to find out more!
Chapters
0:00 Introduction
0:35 What you need
1:28 This method means you will never have to use double-sided tape again
2:18 Sandpaper in the UK
2:57 Start with the masking tape
4:47 Once both surfaces have the masking tape - you need superglue
7:02 Moving on - a neck blank template and a piece of wood
7:44 Once again, masking tape on both pieces and burnish the tape
8:28 Superglue next making sure it does not go on the wood
9:20 This will not move!
10:48 Now comes the magic - grab the end and -
11:27 The greatest little trick you will ever learn and conclusion
______________________________________________________________________
We'd like to thank our partners for helping to make this video series possible.
Triton Tools - http://www.tritontools.com/en-GB
Wagner Meters - https://www.wagnermeters.com/
ISOtunes Bluetooth Hearing Protection - http://bit.ly/36YmKro
Support us by supporting our Partners, and at the same time get yourself a great deal with ISOtunes. Use code "CRIMSON10" for £10 off at "isotunes.co.uk" or $10 off at "isotunes.com"
Get the Freshest CA glues in the market (USA orders) at www.starbond.com
Use Code 'CRIMSONGUITAR' at checkout to save 15% off on your purchase https://www.starbond.com/?rfsn=4953733.fb5f31 ______________________________________________________________________
WEBSITE: http://www.crimsonguitars.com
Luthier’s Tools & Supplies: http://bit.ly/LuthTools
Guitar Building Courses: http://bit.ly/LuthierySchool
Kit Guitars: http://bit.ly/KitGuitars
SOCIAL
Instagram - https://www.instagram.com/crimsonguitars/
Facebook -https://www.facebook.com/CrimsonCustomGuitars/
As always, thank you so much to our Patrons, who help make videos like this possible.
Patreon –https://www.patreon.com/crimsonguitars
OTHER Ben's Vintage Tool Shop - https://vintagetoolshop.com/
Thank you again for all your support, we really appreciate it! – Ben
Stay tuned and stay awesome!
Видео Masking Tape & Superglue - The Greatest Luthiers Trick of All канала Crimson Custom Guitars
In this episode, we have the number one luthiers tip from Ben Crowe
Most guitar builders will use double-sided tape many times throughout their week and most of them grow to loathe it!
Double-sided tape is often too strong and it is hard to separate your template and the guitar, or it is too thick and there is some give when using your bearing-cutter and router to finalize the guitar's body shape. It can also leave a sticky, hard to remove residue on your work, jig, or template and sometimes simply fails.
We have a stunningly successful double-sided tape alternative that we use at Crimson Guitars and it has replaced the use of double-sided tape and spray glues in our workshops.. watch this video to find out more!
Chapters
0:00 Introduction
0:35 What you need
1:28 This method means you will never have to use double-sided tape again
2:18 Sandpaper in the UK
2:57 Start with the masking tape
4:47 Once both surfaces have the masking tape - you need superglue
7:02 Moving on - a neck blank template and a piece of wood
7:44 Once again, masking tape on both pieces and burnish the tape
8:28 Superglue next making sure it does not go on the wood
9:20 This will not move!
10:48 Now comes the magic - grab the end and -
11:27 The greatest little trick you will ever learn and conclusion
______________________________________________________________________
We'd like to thank our partners for helping to make this video series possible.
Triton Tools - http://www.tritontools.com/en-GB
Wagner Meters - https://www.wagnermeters.com/
ISOtunes Bluetooth Hearing Protection - http://bit.ly/36YmKro
Support us by supporting our Partners, and at the same time get yourself a great deal with ISOtunes. Use code "CRIMSON10" for £10 off at "isotunes.co.uk" or $10 off at "isotunes.com"
Get the Freshest CA glues in the market (USA orders) at www.starbond.com
Use Code 'CRIMSONGUITAR' at checkout to save 15% off on your purchase https://www.starbond.com/?rfsn=4953733.fb5f31 ______________________________________________________________________
WEBSITE: http://www.crimsonguitars.com
Luthier’s Tools & Supplies: http://bit.ly/LuthTools
Guitar Building Courses: http://bit.ly/LuthierySchool
Kit Guitars: http://bit.ly/KitGuitars
SOCIAL
Instagram - https://www.instagram.com/crimsonguitars/
Facebook -https://www.facebook.com/CrimsonCustomGuitars/
As always, thank you so much to our Patrons, who help make videos like this possible.
Patreon –https://www.patreon.com/crimsonguitars
OTHER Ben's Vintage Tool Shop - https://vintagetoolshop.com/
Thank you again for all your support, we really appreciate it! – Ben
Stay tuned and stay awesome!
Видео Masking Tape & Superglue - The Greatest Luthiers Trick of All канала Crimson Custom Guitars
Показать
Комментарии отсутствуют
Информация о видео
30 сентября 2014 г. 17:33:55
00:13:30
Другие видео канала
CHEAP and EFFECTIVE DIY fret crowning toolBlue Tape And Super Glue VS The AlternativeA Guitar Builder Looks at a Chinese made FAKE Gibson Supreme Chibson GuitarGuitar Fret Leveling Why and How - Part 1 of 2The FASTEST and EASIEST way to crown and polish frets (and it won't break the bank!)Super glue trick the cops dont want you to know14 Masking Tape Tips in the WorkshopGuitar Repair - You Won't Believe What I Found Inside...Tutorial Ep 1 of 2 - Top Mistakes to Try and Avoid When You Begin Building GuitarsEp 2 Taking a Cheap Kit Guitar and Making it GREAT - A new topShou Sugi Ban - Guitar finishing step-by-stepBuying all the basic tools needed to build a guitar - Podcast 65Levelling, Crowning and Dressing the Frets of a Worn PRS Guitar FretboardExperimental Luthiery - Oxidising Guitar Woods - Using vinegar and wire woolAn Easy Way To Make Rounded Hemispherical Fret Ends For A GuitarHow to make sharp fret ends smooth with fret dressing fileNever Level Guitar Frets Again!How To True Up A Combination Square The Simple Way AND Tune It Up To Make It Work Better For YouSplit Body Copper Leafed Madness... In a Guitar? (Part 1/4)