1 Channel DC12V Remote Control Switch QIACHIP KR1201
433Mhz Universal Wireless Remote Control Switch DC12V 10A 1CH relay Receiver Module and RF Transmitter 433 Mhz Remote Controls
From:
https://www.aliexpress.com/store/product/433Mhz-Universal-Wireless-Remote-Control-Switch-DC12V-10A-1CH-relay-Receiver-Module-with-RF-Remote-433/1456073_32654303650.html
Working mode: Momentary, Toggle, Latching
About Working mode:
Momentary:Push the remote button , the relay connects, release the remote button , the relay dis-connects.
Toggle:Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .
Latching:Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
Tiem delay mode :Push the remote control button , the relay connects , from when release the remote button , after 5s or 10s or 15s , the relay disconnect automatically .
Clearing the code :
Push the learning button on the receivers for 8 times , the codes will be cleaned .
After clearning the code, all the remote control cannot work any more.
Learning the code :(momentary)
Push the learning key on the receiver once time , it comes into momentary setting mode .
Wait for a moment , the LED will be off , it comes into learning state .
Push the remote button , LED indicator on the receiver board will flash then come off .
After 3 seconds, the LED indicator will be on again , learning successfully .
Learning the code : ( Toggle )
Push the learning key on the receiver twice time , it comes into toggle setting mode
Wait for a moment , the LED will be off , it comes into learning state .
Push the remote button,LED indicator on the receiver board will flash then come off.
After 3 seconds , the LED indicator will be on again , learning successfully .
Learning the code :( Latching )
Note: When you choose for latching mode , in order to learn more remote control , you need to learn two different button , the first time learnt is for "ON", the second time learnt for "OFF".
For example : button A = ON , button B = OFF
Push the learning key on the receiver triple time , it comes into latching mode .
Wait for a moment , the LED indicator on the receiver board will flash then come off.
Push the remote button A .
LED flash for 5 times .
Push the remote button B .
Led flash for 5 times .
After 3 seconds , the LED indicator will be on again , learning successfully.
A = ON , B = OFF .
Learning the code :( Time delay mode )
Push the learning key on the receiver forth time , the time dealy for 5 seconds .
Push the learning key on the receiver fifth time , the time delay for 10 seconds .
Push the learning key on the receiver sixth time , the time delay for 15 seconds .
The LED indicator will be off .
Push the remote button , LED flashes and off .
After 3 seconds , the LED indicator will be on again , learning successfully .
Видео 1 Channel DC12V Remote Control Switch QIACHIP KR1201 канала qiachip.com
From:
https://www.aliexpress.com/store/product/433Mhz-Universal-Wireless-Remote-Control-Switch-DC12V-10A-1CH-relay-Receiver-Module-with-RF-Remote-433/1456073_32654303650.html
Working mode: Momentary, Toggle, Latching
About Working mode:
Momentary:Push the remote button , the relay connects, release the remote button , the relay dis-connects.
Toggle:Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .
Latching:Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
Tiem delay mode :Push the remote control button , the relay connects , from when release the remote button , after 5s or 10s or 15s , the relay disconnect automatically .
Clearing the code :
Push the learning button on the receivers for 8 times , the codes will be cleaned .
After clearning the code, all the remote control cannot work any more.
Learning the code :(momentary)
Push the learning key on the receiver once time , it comes into momentary setting mode .
Wait for a moment , the LED will be off , it comes into learning state .
Push the remote button , LED indicator on the receiver board will flash then come off .
After 3 seconds, the LED indicator will be on again , learning successfully .
Learning the code : ( Toggle )
Push the learning key on the receiver twice time , it comes into toggle setting mode
Wait for a moment , the LED will be off , it comes into learning state .
Push the remote button,LED indicator on the receiver board will flash then come off.
After 3 seconds , the LED indicator will be on again , learning successfully .
Learning the code :( Latching )
Note: When you choose for latching mode , in order to learn more remote control , you need to learn two different button , the first time learnt is for "ON", the second time learnt for "OFF".
For example : button A = ON , button B = OFF
Push the learning key on the receiver triple time , it comes into latching mode .
Wait for a moment , the LED indicator on the receiver board will flash then come off.
Push the remote button A .
LED flash for 5 times .
Push the remote button B .
Led flash for 5 times .
After 3 seconds , the LED indicator will be on again , learning successfully.
A = ON , B = OFF .
Learning the code :( Time delay mode )
Push the learning key on the receiver forth time , the time dealy for 5 seconds .
Push the learning key on the receiver fifth time , the time delay for 10 seconds .
Push the learning key on the receiver sixth time , the time delay for 15 seconds .
The LED indicator will be off .
Push the remote button , LED flashes and off .
After 3 seconds , the LED indicator will be on again , learning successfully .
Видео 1 Channel DC12V Remote Control Switch QIACHIP KR1201 канала qiachip.com
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Test:Car alarm #remotecontrol #wireless #diy #433mhzMore than just a box : a wireless remote switch receiver #433mhz #packagingHow to keep a healthier life, you need a UV sterilizer bag!What products have been tested today? 6 wireless lights switch kit #remotecontrol #testing #kr2201gsceiling fan with light and remote #433mhz #clone #duplicateWhat products have been packed today? 15 wireless remote control & control #smarthome #ewelinkwiring of ceiling fan light controller #wireless #remotecontrol #wiring #ceilingfanHow to use modules 868mhz RF Transmit-Receive Integrated Output 400m Long-Distance TransmissionCombination play: micro receiver, remote control, alarm, light, module#433mhz #diyTips: Turn off the beep#433mhz #ceilingfan #diyHow to use the DT07 smart lampholder to connect to a Zigbee Hub for control with the eWeLink AppHow was packed today? 8 A miniature DC wireless RF remote control switch #module #packaging2.4GHz smart switch control test and 86 panel switch #remotecontrol #wireless #diySwing control test!Successful new product #remotecontrol #wireless #diy #433mhz #touchlessWhat products have been tested today? 13 mini wireless remote control switch dc 6V 12V 24V #diyWhat products are being packaged today? #remotecontrol #packaging #wireless #batteryAuto Face Tracking Tripod Gimbal Stabilizer 360 Rotation Selfie Stick Phone holder for Live VlogWhat was packed today? 16 DC12V 1CH relay receiver module #remotecontrol #wireless #433mhzCompared with remote control, which one is more cost-effective?What products have been soldered today?1 DC6V 12V 24V 1Ch channel relay wireless secure RF remoteHow to use the DT03 Smart Lighthead Controller