Drill rig kellybar
Preparing the broken kellybar for welding. Had to torch cut a bevel. Kinda goofed. Had some serrations appear because of not enough preheat. I used a Victor torch with a No.1 tip and my Oxy/Acy pressures at 7/70. The serrations weren't deep enough to worry about. It welded fine. One of the best things for making bevel cuts in any thickness of plate is a good preheat. Sometimes you can get away with little to no heat but if not, it will definitely give you problems. Doesn't hurt to get into the practice of adding a little heat to anything you cut.
Видео Drill rig kellybar канала I C Weld
Видео Drill rig kellybar канала I C Weld
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Podcast with ICWeldbucket ear repairBrazed Gear repairDrill Rig Blues.Easy Peasy 416 Caterpillar Backhoe repairTorch Name Cut out.More CAT Excavator ProblemsWhat is Double Banding Pipe Casing??Broken bolt removalTry this next time. You dont need an Arc gouger. Back hoe repair Part 1.Broken Excavator Boom!!! How to fix it!Torch cutting Pointers (Icweld)Broken Auger Pilot Bit Pocket replacementExcavator Ripper Attachment Rebuild - Welding on new adapterSomething's Not Right!!Something's missing!!!Torch Work. (Old Footage)Try this with a Torch!!Broken Ripper shank!