Making A Raspberry Pi Home Assistant Hub Using The Atomstack X20 Pro
In this video, I'm going to use the new Atomstack X20 Pro laser cutter to make a Home Assistant hub to control my smart home devices. The X20 Pro uses a clever quad laser design to achieve 20W of optical cutting power, a first for a consumer-level diode laser.
Thanks to Atomstack for providing the X20 Pro for this project, check out their online store through the links below.
ADDITIONAL INFORMATION
---------------------------------------------------
Visit my blog for the written build & CAD files - https://www.the-diy-life.com/i-made-a-home-assistant-hub-using-the-atomstack-x20-pro/
Get the Atomstack X20 Pro - https://bit.ly/3zXLJwz
Smart Home Solver's channel - https://www.youtube.com/c/SmartHomeSolver
How to Design a Case in Inkscape - https://youtu.be/Sd9NRY723do
PURCHASE LINKS
---------------------------------------------------
Raspberry Pi 4B - https://amzn.to/3xJXtQA
32GB Sandisk Ultra MicroSD Card - https://amzn.to/3Qe6ObL
Aluminium Heatsink - https://amzn.to/3QGCYwD
Conbee II Zigbee Gateway - https://amzn.to/3QDFPq5
M3x8mm Button Head Screws - https://amzn.to/3NOTQPT
M3 Nuts - https://amzn.to/3NOTQPT
M2.5 Brass Standoffs - https://amzn.to/3zUkRgT
M2.5 Nuts - https://amzn.to/3zUkRgT
M2.5 Screws - https://amzn.to/3zUkRgT
Equipment Used:
Atomstack X20 Pro - https://bit.ly/3zXLJwz
Electric Screwdriver - https://amzn.to/3aOeDVa
Milwaukee Oscillating Multitool - https://amzn.to/3ba0VvY
Some of the above parts are affiliate links. By purchasing products through the above links, you’ll be supporting this channel, at no additional cost to you.
CHAPTERS
---------------------------------------------------
0:00 Intro
0:55 Unboxing & Setup of the X20 Pro
4:25 Test Cut & Engraving
5:25 Designing the Home Assistant Hub
6:05 Laser Cutting the Housing
7:45 Assembling the Housing
8:45 Using the Atomstack App
9:12 Installing the Hub Components
11:35 Zigbee Gateway
12:44 Boot up & Using the Hub
14:05 Final Thoughts
If you've got any ideas for Raspberry Pi, Arduino, or other Electronics projects or tutorials you'd like to see, let me know in the comments section.
Видео Making A Raspberry Pi Home Assistant Hub Using The Atomstack X20 Pro канала Michael Klements
Thanks to Atomstack for providing the X20 Pro for this project, check out their online store through the links below.
ADDITIONAL INFORMATION
---------------------------------------------------
Visit my blog for the written build & CAD files - https://www.the-diy-life.com/i-made-a-home-assistant-hub-using-the-atomstack-x20-pro/
Get the Atomstack X20 Pro - https://bit.ly/3zXLJwz
Smart Home Solver's channel - https://www.youtube.com/c/SmartHomeSolver
How to Design a Case in Inkscape - https://youtu.be/Sd9NRY723do
PURCHASE LINKS
---------------------------------------------------
Raspberry Pi 4B - https://amzn.to/3xJXtQA
32GB Sandisk Ultra MicroSD Card - https://amzn.to/3Qe6ObL
Aluminium Heatsink - https://amzn.to/3QGCYwD
Conbee II Zigbee Gateway - https://amzn.to/3QDFPq5
M3x8mm Button Head Screws - https://amzn.to/3NOTQPT
M3 Nuts - https://amzn.to/3NOTQPT
M2.5 Brass Standoffs - https://amzn.to/3zUkRgT
M2.5 Nuts - https://amzn.to/3zUkRgT
M2.5 Screws - https://amzn.to/3zUkRgT
Equipment Used:
Atomstack X20 Pro - https://bit.ly/3zXLJwz
Electric Screwdriver - https://amzn.to/3aOeDVa
Milwaukee Oscillating Multitool - https://amzn.to/3ba0VvY
Some of the above parts are affiliate links. By purchasing products through the above links, you’ll be supporting this channel, at no additional cost to you.
CHAPTERS
---------------------------------------------------
0:00 Intro
0:55 Unboxing & Setup of the X20 Pro
4:25 Test Cut & Engraving
5:25 Designing the Home Assistant Hub
6:05 Laser Cutting the Housing
7:45 Assembling the Housing
8:45 Using the Atomstack App
9:12 Installing the Hub Components
11:35 Zigbee Gateway
12:44 Boot up & Using the Hub
14:05 Final Thoughts
If you've got any ideas for Raspberry Pi, Arduino, or other Electronics projects or tutorials you'd like to see, let me know in the comments section.
Видео Making A Raspberry Pi Home Assistant Hub Using The Atomstack X20 Pro канала Michael Klements
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Supercharge Your Home Cluster With The Mixtile Blade 3Arduino Based Reaction Timer - Improve Your Reaction TimeHow To Replace The Earpiece Speaker On An iPhone 6How Fast Can An Arduino React? Tested Using My Reaction Timer GameArduino Soil Moisture Monitor - Never Forget To Water Your Indoor PlantsHow To Replace Stripped Servo Gears - Done On A Turnigy Micro ServoDIY Smart Indoor Plant Base - Know When Your Plant Needs WateringArducam Introduces the New Time of Flight Camera! Your Pi Can Now See In 3DI Turned PET Bottles Into A 3D Printed Pi Case - DIY Bottle RecyclerControl A 3D Printer's Hotend With An Arduino - PET Bottle Recycler Part 1Comparing Cooling Solutions On A Raspberry Pi 4 - Is Water Cooling Worth It?Bitcoin Price Ticker Using An ESP32 and OLED DisplayAwesome Cyberpunk Case For The Raspberry Pi 4 - Pironman by SunfounderArduino Automatic Blind Opener - Works With A Remote Control & AlexaHanging Gear Weather Station - Driven By Stepper Motors & An ArduinoThermal Testing My Water Cooled Raspberry Pi Cluster - Does Loop Order Matter?I Upgraded My 3D Printed IoT Weather Station Using Your SuggestionsTuring Pi 2 Build Update - Tinted Acrylic & PicoPSU128 Cores for AI Vision Projects, the reComputer Jetson-10Making An Indoor Air Quality Monitor With A DFRobot CO2 SensorMaking an Arduino Oplà IoT Weather Station with Cloud Dashboard