Phantom 3 Professional Radio throttle stick mod (remove spring) P3P
Test Video of it working at the end!
I wanted to remove the spring from my throttle stick so that the throttle would stay wherever I put it. Just like my spektrum, futaba and taranis radio. I understand that a lot of your don't like the idea of this and I'm sorry. Please feel free to comment below. So the reasons I modded my joystick like this. As someone who has been flying for years and has built most of my own multirotors I have gotten used to this flying style(because that's how all radios came before DJI started doing the return to mid point thing). I find that the benefits of flying with a throttle stick that stays where you put it is that you get more precises shots with altitude changes while being able to control the tilt all at once. For example if i'm gaining altitude over the roof of a house while moving forward. I can take my hand completely off the left joystick and put all my efforts of my left hand controlling the camera tilt control to have a precise frame. Also the build in dji throttle curve makes its very easy to keep the UAV's altitude without having to look at osd.
I tried to do it without removing the back plate completely and failed so just watch this video to see what I did wrong so you do it right.
Видео Phantom 3 Professional Radio throttle stick mod (remove spring) P3P канала Straight Tech
I wanted to remove the spring from my throttle stick so that the throttle would stay wherever I put it. Just like my spektrum, futaba and taranis radio. I understand that a lot of your don't like the idea of this and I'm sorry. Please feel free to comment below. So the reasons I modded my joystick like this. As someone who has been flying for years and has built most of my own multirotors I have gotten used to this flying style(because that's how all radios came before DJI started doing the return to mid point thing). I find that the benefits of flying with a throttle stick that stays where you put it is that you get more precises shots with altitude changes while being able to control the tilt all at once. For example if i'm gaining altitude over the roof of a house while moving forward. I can take my hand completely off the left joystick and put all my efforts of my left hand controlling the camera tilt control to have a precise frame. Also the build in dji throttle curve makes its very easy to keep the UAV's altitude without having to look at osd.
I tried to do it without removing the back plate completely and failed so just watch this video to see what I did wrong so you do it right.
Видео Phantom 3 Professional Radio throttle stick mod (remove spring) P3P канала Straight Tech
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
DJI Phantom 4 & 3 Pro/Adv Antenna ModMotors Cut Mid-Flight???Drone Night at the Museum - Aerial Drone Video Royal Ontario Museum - OntaerialRemoving the spring from Gamepad Joysticks.DJI Phantom 4 vs Phantom 3 | Which is the better drone? | COMPARISONDynamically balancing your motors and props for multirotor at the same time - OntaerialFilming Car Interiors with Edelkrone Slider Plus X & Motion KitDJI Phantom - "25 Tips and Mods" for your Multi Rotor, Quad Copter, Drone!High Park Toronto in Autumn - Aerial drone video - OntaerialHow to use Follow-Me mode | DJI Phantom, Mavic, SparkPhantom 3 Retractable Landing Gear Installation InstructionBattery Mod - Combining two LIPO batteriesDJI Phantom 3 Standard - Cheapest Antenna Mod upgrade DIY - FPVLR / DBSMod alternativePhantom tips over on landing? If you're doing CSC to stop the motors, you shouldn't!DJI Phantom 3 Pro/Adv - Replacing / Changing / Fixing the Shell - Part 1/6DJI Phantom-To Make the Throttle Stick Centered AutomaticallyHow Stable Is DJI Phantom Hover In Strong Wind With GPS Mode | MicBergsmaDJI Phantom 3 Gimbal Vibration/Noise Mod Values & Common ErrorsHow to adjust Yaw Speed | DJI Phantom 3 | Gain and ExpoIrixGuy's Phantom 3 Modifications