Ten Things to do to Your Brush Hog Before Using
A little maintenance can go a long way toward insuring a long life for your equipment. I don't know if you're like I am, but I generally get in the mood to run the cutter and ten minutes later I'm in the field. As I'm driving the fence row for the first round I'm wondering "Is there oil in the gear box"? Or, "I wonder if the cutter is level?" Of course, these are things to think about way before you hit the field, but that's the way I tend to roll. I have to admit, hosting this channel has helped me become better at preventative maintenance and more geared toward a little planning. So, as I was getting ready to go to the field, I thought it might help everyone out to have a short checklist of ten things to look at before engaging that PTO for the first time this season.
I've covered a lot of these in earlier videos, this is the first time I've really consolidated them all together. As mentioned in the video, there are more than just ten things you need to do to get your cutter ready for the field, always consult your owner's manual and do what it says. Having said that, most guys (maybe it's a problem with gals too, it's not with my wife), REFUSE to read the owner's manual and follow directions. I'm not sure why we're geared that way, I'm the same way, I'll watch a video about it, but reading the manual seems unmanly and puts me to sleep. If you're like that, this video is for you, it'll get you past the basics.
I really enjoy the brush hogging process. It's one activity that you can do and, when you're done, every time you look at it, it gives you a feeling of accomplishment. Hopefully, this list will not let a breakdown spoil the moment.
In the video, I said I'd provide a link to the other video I did on how to slip a slip clutch. It's a couple of years old, but it shows the process that works on most slip clutches (not all though), and will head you in the right direction for keeping that device maintained.
Here's the link: https://youtu.be/eVRr9eechLI.
SUPPORT THE TRACTOR MIKE CHANNEL: https://www.patreon.com/TractorMike
Visit the Tractor Mike website: http://asktractormike.com/
Subscribe to YouTube Channel: http://www.youtube.com/user/tractormike?sub_confirmation=1
Visit Facebook Page: https://www.facebook.com/Ask-Tractor-Mike-312112962245304/
Buy Stuff I Use: https://www.amazon.com/shop/tractormike
Copyright 2017 Tractor Mike, LLC
Видео Ten Things to do to Your Brush Hog Before Using канала Tractor Mike
I've covered a lot of these in earlier videos, this is the first time I've really consolidated them all together. As mentioned in the video, there are more than just ten things you need to do to get your cutter ready for the field, always consult your owner's manual and do what it says. Having said that, most guys (maybe it's a problem with gals too, it's not with my wife), REFUSE to read the owner's manual and follow directions. I'm not sure why we're geared that way, I'm the same way, I'll watch a video about it, but reading the manual seems unmanly and puts me to sleep. If you're like that, this video is for you, it'll get you past the basics.
I really enjoy the brush hogging process. It's one activity that you can do and, when you're done, every time you look at it, it gives you a feeling of accomplishment. Hopefully, this list will not let a breakdown spoil the moment.
In the video, I said I'd provide a link to the other video I did on how to slip a slip clutch. It's a couple of years old, but it shows the process that works on most slip clutches (not all though), and will head you in the right direction for keeping that device maintained.
Here's the link: https://youtu.be/eVRr9eechLI.
SUPPORT THE TRACTOR MIKE CHANNEL: https://www.patreon.com/TractorMike
Visit the Tractor Mike website: http://asktractormike.com/
Subscribe to YouTube Channel: http://www.youtube.com/user/tractormike?sub_confirmation=1
Visit Facebook Page: https://www.facebook.com/Ask-Tractor-Mike-312112962245304/
Buy Stuff I Use: https://www.amazon.com/shop/tractormike
Copyright 2017 Tractor Mike, LLC
Видео Ten Things to do to Your Brush Hog Before Using канала Tractor Mike
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![How to Brush Hog (or Bush Hog) for the First Time...10 Tips That Make it Easier and Safer](https://i.ytimg.com/vi/USSFq5I6B6U/default.jpg)
![Adjusting the Tractor Top Link to Pull a Brush Hog](https://i.ytimg.com/vi/EcjJ8IBPUao/default.jpg)
![Sharpening Brush Hog Blades: Should You Sharpen them? I Say Yes and Show You How I Do It (#94)](https://i.ytimg.com/vi/mzkgm-M7ZEg/default.jpg)
![12 Things You May Not Know About Greasing](https://i.ytimg.com/vi/079Bwumr_ZM/default.jpg)
![Slip Clutch or Shear Bolt Driveline Protection...Which is Best?](https://i.ytimg.com/vi/PbSGAyrx9sY/default.jpg)
![Review of the Harbor Freight $99 Quick Hitch](https://i.ytimg.com/vi/SBWzBu_7t5Y/default.jpg)
![Do YOU Really Know How to Use a Box Blade? | Hydraulic Top Link | TYM Tractors](https://i.ytimg.com/vi/c00WiAPKli4/default.jpg)
![A Tip to Make Hooking Up a Brush Hog Easy](https://i.ytimg.com/vi/o6FLBUjZt_0/default.jpg)
![Brush Cutting Crazy Overgrown Field with Small Tractor?](https://i.ytimg.com/vi/M_tZiiDnDTw/default.jpg)
![How to Set Brush Hog Tail Wheels](https://i.ytimg.com/vi/DWZdB6zX9JA/default.jpg)
![Is Pat's Easy Change the Best Hook Up for 3 Point Implements?](https://i.ytimg.com/vi/6Rsdr-wz4f4/default.jpg)
![How to Adjust your Rotary Mower [Kubota L3901 RCR1260 Mower]](https://i.ytimg.com/vi/V3kU6lOOsJM/default.jpg)
![How Steep a Slope Can I Take My Tractor On?](https://i.ytimg.com/vi/BaT9uVxkMBs/default.jpg)
![How to sharpen" bush hog" or rotary cutter blades and properly inspect and maintain](https://i.ytimg.com/vi/cSf64ScYr30/default.jpg)
![All About Box Blades](https://i.ytimg.com/vi/HozFLzn5UdY/default.jpg)
![Slipping a Slip Clutch](https://i.ytimg.com/vi/eVRr9eechLI/default.jpg)
![How to Sharpen Brush Cutter Blades](https://i.ytimg.com/vi/Lllw_odH_24/default.jpg)
![Tractor University: Proper Mower Deck Setup for Brush Hogging](https://i.ytimg.com/vi/rLu75oHiwMg/default.jpg)
![Rotary cutter adjustments. Improving mower float.](https://i.ytimg.com/vi/RSuUNN59LT4/default.jpg)
![How to connect your mowing implement to your Tractor](https://i.ytimg.com/vi/smZH_C39dgM/default.jpg)