Robokits Arduino Uno based 18 Servo Controller board - Part- 5 (Arduino Code and External Hardware)

In this 5th and concluding part of our video series on the Robokits Servo Controller Board, we will discuss about converting the graphical software moves to an arduino code and define functions using the same. Also we will describe the interface with external hardware on the digital pins simultaneously while running the servo controller moves.

We have other 4 videos on the Robokits servo controller board :

Part 1 - An Introduction - This video is an introduction to the Arduino Uno R3 based bluetooth and USB 18 servo controller RKI-1252. Visit the link https://youtu.be/YPEX_n_iYlw to watch the video.

Part-2 ( Bluetooth Control) - This video shows to setup bluetooth connection between Robokits Servo Controller Board and PC to remotely control your RC servo robot. Visit the link https://youtu.be/nxdqVgl6-1s to watch the video.

Part- 3 (Delay, Speed and GOTO functions) - In this video we will discuss about Delay, Speed and GOTO function of Robokits Servo Controller Board software. Visit the link https://youtu.be/EUbt3ogk0dg to watch the video.

Part- 4 (Centre,Reverse,Limits functions) - In this video we will discuss about center and home position setting, reverse direction setting and minimum & maximum movement setting of Robokits Servo Controller Board software. Visit the link https://youtu.be/DIPaeyQKvmI to watch the video.

This is a multi function board which has 2 controllers inbuilt on the board, one master arduino controller and the other slave controller for controlling 18 servo controllers. So this board has all the arduino digital and 4 analog pins available for use simultaneously with the 18 servos running.

This board can be used by novice users as an introduction to robotics and by advanced users to make highly complex arduino based robots.

Do check out the product page and the various interesting robots made using this board. The link for this board is provided below -
https://robokits.co.in/control-boards/rc-servo-controller/arduino-uno-r3-based-bluetooth-usb-18-servo-controller

For any further details regarding the boards, please get in touch with us techinnovate18@gmail.com

Видео Robokits Arduino Uno based 18 Servo Controller board - Part- 5 (Arduino Code and External Hardware) канала MakeIt Ideas