EV3 DIY Console project

Hello! This is the EV3 DIY console!

**PLEASE NOTE THAT SONE FEATURES MIGHT NOT WORK AS INTENDED**

Summary of things you will need:
-1 EV3 brick
-1 computer capable of running Java
-a leJOS SD card
-the program (https://1drv.ms/u/s!Aim9PopbqZKfvwbI3LyMtG7L71yi)

Now, let’s take a look at the steps you need to follow:
•Set up leJOS ev3 🤖
- if you don’t know how, there are plenty of tutorials on the internet! If you do, then just insert the SD card
- connect the brick to the pc using an USB cable (if you have a WiFi dongle, that works too!)
•Build your console 🔨
- make use of various motors and sensors!
•Start the program
- just download the program (link above)
- the leJOS ev3 brick should be in the menu
•Set up keybinds ⌨️
-this is pretty straightforward, the program will be explained later
•Play! 👾
-it works with any game, if set up correctly!

💻 How the program works:
First, click “Detect EV3-s”
Then select your EV3 device with laJOS installed from the list
After that, you need to give a name to your action
Then select the port your sensor is in;
Then select your type of sensor/motor (color sensors are not support currently);
Then select the mode of your sensor;
Then select a value in the slider;
Then select when do you want to press the button: when the value is lower than x, larger than x, or equals x;
There is also a special mode: Changes this amount. This mode waits for the amount of time given in the box next to it, then checks whether the value has increased x (this only works with positive numbers);

📝 Notes:
-If something isn’t working, try restarting your ev3 brick, and the program
Before quitting the program, make sure that all keybinds are removed ( using the “-“ button)
-If something isn’t working, you can contact us at: storms@molnarnet.hu

Видео EV3 DIY Console project канала Storms - Csaba Molnár