Making a Toolpost Grinder Part 13: Toolpost Clamp 2

This is part 13 of the toolpost grinder build series.

Last time, we made the dovetail in the toolpost clamp. This time, we're going to cut a 1-1/2" (38mm) hole through it to accept the spindle. We'll use an annular cutter (Rotabroach) to remove the majority of the material and illustrate an easy way to hold it in a small lathe.
If you haven't seen the previous videos, a playlist with all of the parts of this project is here: https://www.youtube.com/playlist?list=PLDlWKv7KIIr-uFMjbe7AlsHswL6qihPPU

If you're following along with the build, here are some links to some of the tools used in the video:
*This site contains affiliate links for which I may be compensated

Steel Dragon 1-1/4" x 2" HSS Annular Cutter (Amazon*): http://amzn.to/2BluZ4y
Shars AXA Quick Change Tool Post Set (eBay*): https://goo.gl/sjsf9N
12mm CCMT0602 boring bar (eBay*): https://goo.gl/tJj6Xj
Carbide internal threading bar (eBay*): https://goo.gl/azQcdj
Shars 0-6" .0001" micrometer set (eBay*): https://goo.gl/vvgJ9A

Видео Making a Toolpost Grinder Part 13: Toolpost Clamp 2 канала Clough42