Here's What Happens When a Carpenter does Electronics
The outside of the case is made from solid maple and the top panel is 1/8" thick aluminum painted black. I finished the wood with three coats of waterbased polyurethane.
I love the simple, clean lines and the stark contrast between the painted black parts and the warm natural wood and amber glow from the meters.
The project uses an LM4780 dual channel chip amp that can put out around 50 watts rms into 8 ohm speakers. Not super powerful, but the speakers I built this for don't need a lot of power.
I designed and made the PCB for the chip amp, but wound up redoing the design and making a new circuit board when I made too many mistakes on the first one. All part of the fun!
Also inside the amp case is another circuit board that has an active filter that cuts out the bass. The amp is more than capable of full range output, but I don't want any low frequencies going to the small speakers and the active filter does that.
I built this amp for these speakers: https://youtu.be/ifRdxoOLhKU
NOTE: The chip amp I used for this is obsolete now, but I have a few from when I was much deeper into electronics 15 years ago.
▶️ Project plans for sale: https://ibuildit.ca/plans/
▶️Support the work I do on Locals:
https://ibuildit.locals.com/
▶️ Patreon:
https://www.patreon.com/user?u=865843&ty=h
▶️ Join my Makers Mob for detailed build tutorials:
https://go.themakersmob.com/john-heisz-i-build-it/?via=ibuildit
My "Scrap bin" channel:
https://www.youtube.com/c/IBuildItScrapBin
#ibuildit
#woodworking
Website: https://ibuildit.ca/
Facebook: https://www.facebook.com/I-Build-It-258048014240900/
Instagram: https://www.instagram.com/i_build_it.ca/
Видео Here's What Happens When a Carpenter does Electronics канала John Heisz - I Build It
I love the simple, clean lines and the stark contrast between the painted black parts and the warm natural wood and amber glow from the meters.
The project uses an LM4780 dual channel chip amp that can put out around 50 watts rms into 8 ohm speakers. Not super powerful, but the speakers I built this for don't need a lot of power.
I designed and made the PCB for the chip amp, but wound up redoing the design and making a new circuit board when I made too many mistakes on the first one. All part of the fun!
Also inside the amp case is another circuit board that has an active filter that cuts out the bass. The amp is more than capable of full range output, but I don't want any low frequencies going to the small speakers and the active filter does that.
I built this amp for these speakers: https://youtu.be/ifRdxoOLhKU
NOTE: The chip amp I used for this is obsolete now, but I have a few from when I was much deeper into electronics 15 years ago.
▶️ Project plans for sale: https://ibuildit.ca/plans/
▶️Support the work I do on Locals:
https://ibuildit.locals.com/
▶️ Patreon:
https://www.patreon.com/user?u=865843&ty=h
▶️ Join my Makers Mob for detailed build tutorials:
https://go.themakersmob.com/john-heisz-i-build-it/?via=ibuildit
My "Scrap bin" channel:
https://www.youtube.com/c/IBuildItScrapBin
#ibuildit
#woodworking
Website: https://ibuildit.ca/
Facebook: https://www.facebook.com/I-Build-It-258048014240900/
Instagram: https://www.instagram.com/i_build_it.ca/
Видео Here's What Happens When a Carpenter does Electronics канала John Heisz - I Build It
Показать
Комментарии отсутствуют
Информация о видео
20 августа 2023 г. 17:55:47
00:07:15
Другие видео канала
A Modern Twist On An Old Carpenters Trick - Cut Joints Perfectly in One PassFinally a Real Innovation in Woodworking - Full Build VideoMake This Game-Changing Essential Tool for WoodworkingTrim Router Basics - Start HereGetting Fancy With Hardwood FlooringWhy Didn't I Think of this Before? Throw Away your old Sanding Block and make these... SeriouslyGenius Idea? Game Changing trick for Perfect Dowel Alignment without a JigUpgrade or Downgrade? You Tell MeMaking a Optical Illusion Poster Frame - Woodworking ProjectMaking Fancy Doorway Trim MouldingMaking a Wood Panel Ceiling with Lighting - Sunburst PatternMaking A Modern Bed with Traditional JoineryMake Inlays the Easy Way - Perfect Fit Every TimeMaking a Small Parts Organizer with Drawers from CardboardSmall Shop Essential - How To Make a Low Cost Air CleanerEasy to Make Dust Collector for the DeWalt DW735 PlanerMaking a $3000 Tool from Spare Parts and Scrap Wood - Full BuildThis is a Game Changer - Making the Table Saw Fence YOU Asked ForMaking Open Baffle Speakers - Full Build VideoEasiest way to Make Small Drawers - WoodworkingGrinding on the Table Saw? Let's Try it