OMTech 5200 / 5202 - Constant Temp Mode Settings
I like to keep my chiller in constant temperature mode so that I know that my laser is in a safe operation temperature. This video shows how to program these setting on you OMTech CW 5202 or CW 5200.
Chiller settings:
To enter programming press the up button and set button for 5 seconds until 0 is displayed.
F3 "Constant Temp Mode"- 0
SET
F9 "Lowest Water Temp" - 16
SET
F0 "Water Temp" - 18
SET
RST
At the end of the setting press the RST button to save all settings and exit to operation.
Affiliate stuff:
Chiller:
https://omtechlaser.com/collections/accessories/products/6l-water-chiller-lcw-5200-us?ref=LGS
Amazon Affiliate Products
https://Amazon.com/shop/beardedbuildsco
Laser Blog:
https://beardedbuildsco.com/blogs/laser-blog
OMTech Facebook Group:
https://www.facebook.com/groups/1364016877267714
Socials:
Instagram.com/beardedbuildsco
Facebook.com/beardedbuildsco
Видео OMTech 5200 / 5202 - Constant Temp Mode Settings канала Bearded Builds Co
Chiller settings:
To enter programming press the up button and set button for 5 seconds until 0 is displayed.
F3 "Constant Temp Mode"- 0
SET
F9 "Lowest Water Temp" - 16
SET
F0 "Water Temp" - 18
SET
RST
At the end of the setting press the RST button to save all settings and exit to operation.
Affiliate stuff:
Chiller:
https://omtechlaser.com/collections/accessories/products/6l-water-chiller-lcw-5200-us?ref=LGS
Amazon Affiliate Products
https://Amazon.com/shop/beardedbuildsco
Laser Blog:
https://beardedbuildsco.com/blogs/laser-blog
OMTech Facebook Group:
https://www.facebook.com/groups/1364016877267714
Socials:
Instagram.com/beardedbuildsco
Facebook.com/beardedbuildsco
Видео OMTech 5200 / 5202 - Constant Temp Mode Settings канала Bearded Builds Co
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
S & A CW5200 installation and setupUltimate OMTech Laser Buyers GuideDefocusing your laser for engraving and etching linesOrion Motor Tech Cw-5202 water chiller reviewNew Omtech 100W Red & Black "Chinese Laser" Plus ModsUnboxing OMTech Water Chiller, Installation, Setup/UpgradeRuida Controller Basics for your OMTech CO2 Laser Engraver - Laser Engraver Tips & Tricks - OMTechIndustrial chiller 5200 Settings EnglishSetup of CW-5200 Water Chiller Unit for CNC Co2 Laser Machine - S&A From Cloudray LaserSelecting Intelligent or Constant Mode on CW-5000 series ChillersChanging settings on CW-5000/CW-5200 ChillerInstalling A Water Chiller In A Laser Engraver Cutter CW-5000/CW-5200CO2 Laser Air Assist UpgradeHow to do a Ramp Test on your CO2 Laser - The Easy wayUpgraded Air Assist for Chinese | OM Tech CO2 LaserLightburn - Print and CutCheap laser cooling without industrial chiller or bags of iceBeginner Tips for using your Ruida Controller on your laserOmtech laser model comparisonInstalling the Lightburn 8MP camera into our OMTECH Laser Cutter