[Part 7 of 10] Waterwheel Microhydro, Powertrain Subframe
NEXT VIDEO Part 8: *More Volts* https://youtu.be/aVQ8g8iZeCI
PLAYLIST: https://www.youtube.com/playlist?list=PLDda5L4aJUB-IuU3SWstKewFvzfv3wJGI
We still haven't sold our house, the price is a little high and the market falls flat on its face during the winter months locally. I'm still working on our next place and we aren't tight on cash so we can afford to sit on it for a little while.
I had to remove the waterwheel to build the subframe, I really didn't want to be working over a flowing creek with bolts and nuts. I used a plated Unistrut for the frame material along with 3/8" hardware to mount the 3/4" bearings. I then used an intermediate axle to transfer power to the second stage sprocket speed increaser. Finally I mounted the motor in a temporary fashion and did some initial testing to ascertain the sort of voltages and currents I could get. Everything looks great so far and I'm happy with it all. In the next video I'll mount the motor, install a diagonal support to the sub-frame to resist racking, grease the bearings, and mount it on new longer wood cross-members under the flume.
Support me on Patreon! https://www.patreon.com/joe_malovich
Support me on Paypal! https://www.paypal.me/joemalovich
Buy me a gift! http://a.co/9ilKfDC
My Approved Gear: https://www.amazon.com/shop/joemalovich
Tool(s) I used can be found here: https://www.amazon.com/shop/joemalovich
Don't forget to subscribe!
Twitter: https://twitter.com/slopecarver
Website: www.joemalovich.com
Facebook: https://www.facebook.com/JoeMalovichYoutube
tunes by bensound.com
Видео [Part 7 of 10] Waterwheel Microhydro, Powertrain Subframe канала Joe Malovich
PLAYLIST: https://www.youtube.com/playlist?list=PLDda5L4aJUB-IuU3SWstKewFvzfv3wJGI
We still haven't sold our house, the price is a little high and the market falls flat on its face during the winter months locally. I'm still working on our next place and we aren't tight on cash so we can afford to sit on it for a little while.
I had to remove the waterwheel to build the subframe, I really didn't want to be working over a flowing creek with bolts and nuts. I used a plated Unistrut for the frame material along with 3/8" hardware to mount the 3/4" bearings. I then used an intermediate axle to transfer power to the second stage sprocket speed increaser. Finally I mounted the motor in a temporary fashion and did some initial testing to ascertain the sort of voltages and currents I could get. Everything looks great so far and I'm happy with it all. In the next video I'll mount the motor, install a diagonal support to the sub-frame to resist racking, grease the bearings, and mount it on new longer wood cross-members under the flume.
Support me on Patreon! https://www.patreon.com/joe_malovich
Support me on Paypal! https://www.paypal.me/joemalovich
Buy me a gift! http://a.co/9ilKfDC
My Approved Gear: https://www.amazon.com/shop/joemalovich
Tool(s) I used can be found here: https://www.amazon.com/shop/joemalovich
Don't forget to subscribe!
Twitter: https://twitter.com/slopecarver
Website: www.joemalovich.com
Facebook: https://www.facebook.com/JoeMalovichYoutube
tunes by bensound.com
Видео [Part 7 of 10] Waterwheel Microhydro, Powertrain Subframe канала Joe Malovich
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Pretty Good House P8, Waterline Installation](https://i.ytimg.com/vi/lqnt7dLC74k/default.jpg)
![Pretty Good House P2, Construction Slideshow](https://i.ytimg.com/vi/gIDeIXt-Boo/default.jpg)
![what to do with this old sugar shack?](https://i.ytimg.com/vi/fIhVadfRoh8/default.jpg)
![Reinvesting In My Channel (New Camera Quick Overview)](https://i.ytimg.com/vi/4_E_kr0r8Is/default.jpg)
![Workshop Knobs On The CNC](https://i.ytimg.com/vi/Nx_MhnsoBHY/default.jpg)
![A New Parking Lot Light](https://i.ytimg.com/vi/IIJ9fwkUDVs/default.jpg)
![Denailer, Put on your safety squints.](https://i.ytimg.com/vi/XUN9QWAHKjs/default.jpg)
![Time Lapse Night Drive (CHDK)](https://i.ytimg.com/vi/ML-BadejIs4/default.jpg)
![pool fill rough grade complete](https://i.ytimg.com/vi/zyUbt1nswEU/default.jpg)
![Denford Sherline CNC Arduino Upgrade Part 1](https://i.ytimg.com/vi/Aaoc0sUIqnM/default.jpg)
![Welder Stuck Hex Bit Extraction](https://i.ytimg.com/vi/YY3reKsLNek/default.jpg)
![A Custom Case I 3D Printed for my Thermal Camera (Old Video)](https://i.ytimg.com/vi/mRjdEpmYDY0/default.jpg)
![A Man Outstanding In His Field](https://i.ytimg.com/vi/lwgzWQKb15A/default.jpg)
![Bear prints on the back porch.](https://i.ytimg.com/vi/orEJYyhiX8k/default.jpg)
![PGH 13, Rambling on about my wiring checklist and assorted other stuffs.](https://i.ytimg.com/vi/UaIesGok4QY/default.jpg)
![Shop Progress 10 - Begin Framing The East Wall.](https://i.ytimg.com/vi/msZ6hUCollg/default.jpg)
![What My Basement Has Been Up To [3d printers, YouTube, theater]](https://i.ytimg.com/vi/p5Zq1I2Rl3M/default.jpg)
![A Walk Around My New Pond](https://i.ytimg.com/vi/2L5Cl1-g9UE/default.jpg)
![What Next?](https://i.ytimg.com/vi/uYiqwAezwR8/default.jpg)
![Pretty Good House P4, New Water Excavation | Joe Tractors](https://i.ytimg.com/vi/wEckmKdlf7Y/default.jpg)
![Stihl FS90R Weedwacker First Start Of The Year, How Many Pulls?](https://i.ytimg.com/vi/77cqrQHSu7g/default.jpg)