Building a Romantic Robot Multiface 128 Clone for ZX Spectrum!
- This video is sponsored by https://www.PCBWay.com -
We're building a Multiface 128 clone today. Originally by romantic Robot, this device allows you to freeze, inspect and dump the content of memory to a storage device, which in no way was a boon for pirates at all, nope!
🤞 PLEASE HELP MARK FIXES STUFF SURVIVE 🏆: Due to "The Event" my livelihood vanished in a puff of smoke. If you can spare some change to help support the channel it is really appreciated and even the smallest pledge goes a long way in helping make more content and feed my cats (and children). Visit https://patreon.com/markfixesstuff for more info about Patreon Benefits!
00:01 - Introduction to the Multiface 128 clone for 48k and 128k ZX Spectrums.
00:13 - Mark Fixes Stuff Intro.
00:18 - PCBWay Sponsor Thanks.
00:31 - Multiface Clone project parts required.
01:57 - A ready-made ZX Spectrum edge connector from https://www.thefuturewas8bit.com/shop/sinclair/sinclair-spares/zxedge.html
02:13 - Cleaning the Multiface 128 recreation PCB.
03:17 - Soldering the decoupling capacitors.
06:01 - Installing the resistors.
06:30 - Installing the DIP14 sockets for the 74 series logic chips.
09:49 - Installing the DIP28 sockets for the 27C64 EPROM and the SRAM chip.
11:40 - Installing the momentary tactile switch for the NMI function.
12:10 - Installing the ZX Spectrum Edge connector!
14:07 - Why you still need to clean "No-Clean" flux!
14:39 - Programming the EPROM for the Spectrum Multiface 128.
17:15 - Installing the supporting 74 series logic chips in the Multiface.
18:15 - Inserting the EPROM programmed with the Multiface 128 v87.12 ROM file.
18:23 - Installing the SRAM chip.
18:36 - The Romantic Robot 128 recreation for ZX Spectrum is complete!
18:45 - Testing the build works on a 48k Spectrum
19:25 - Test on a 129k +2 (Grey/Gray) Spectrum
19:30 - Incompatabilities with later models.
19:45 - Patreon thanks
20:05 - Further viewing that you might enjoy!
The project was reversed by Stephen Smith and has been used here with his express consent. You can order your own boards from https://www.pcbway.com/project/shareproject/Romantic_Robot_Multiface_128_Recreation_for_ZX_Spectrum.html, where you will also find a parts list.
The file you need for programming the EPROM is here: http://markfixesstuff.co.uk/electronics/multiface-128-romantic-robot-v87-12-rom-file-for-eprom-programming/
Visit the ProjectSpeccy Tindie store here - https://www.tindie.com/stores/projectspeccy/
Видео Building a Romantic Robot Multiface 128 Clone for ZX Spectrum! канала Mark Fixes Stuff
We're building a Multiface 128 clone today. Originally by romantic Robot, this device allows you to freeze, inspect and dump the content of memory to a storage device, which in no way was a boon for pirates at all, nope!
🤞 PLEASE HELP MARK FIXES STUFF SURVIVE 🏆: Due to "The Event" my livelihood vanished in a puff of smoke. If you can spare some change to help support the channel it is really appreciated and even the smallest pledge goes a long way in helping make more content and feed my cats (and children). Visit https://patreon.com/markfixesstuff for more info about Patreon Benefits!
00:01 - Introduction to the Multiface 128 clone for 48k and 128k ZX Spectrums.
00:13 - Mark Fixes Stuff Intro.
00:18 - PCBWay Sponsor Thanks.
00:31 - Multiface Clone project parts required.
01:57 - A ready-made ZX Spectrum edge connector from https://www.thefuturewas8bit.com/shop/sinclair/sinclair-spares/zxedge.html
02:13 - Cleaning the Multiface 128 recreation PCB.
03:17 - Soldering the decoupling capacitors.
06:01 - Installing the resistors.
06:30 - Installing the DIP14 sockets for the 74 series logic chips.
09:49 - Installing the DIP28 sockets for the 27C64 EPROM and the SRAM chip.
11:40 - Installing the momentary tactile switch for the NMI function.
12:10 - Installing the ZX Spectrum Edge connector!
14:07 - Why you still need to clean "No-Clean" flux!
14:39 - Programming the EPROM for the Spectrum Multiface 128.
17:15 - Installing the supporting 74 series logic chips in the Multiface.
18:15 - Inserting the EPROM programmed with the Multiface 128 v87.12 ROM file.
18:23 - Installing the SRAM chip.
18:36 - The Romantic Robot 128 recreation for ZX Spectrum is complete!
18:45 - Testing the build works on a 48k Spectrum
19:25 - Test on a 129k +2 (Grey/Gray) Spectrum
19:30 - Incompatabilities with later models.
19:45 - Patreon thanks
20:05 - Further viewing that you might enjoy!
The project was reversed by Stephen Smith and has been used here with his express consent. You can order your own boards from https://www.pcbway.com/project/shareproject/Romantic_Robot_Multiface_128_Recreation_for_ZX_Spectrum.html, where you will also find a parts list.
The file you need for programming the EPROM is here: http://markfixesstuff.co.uk/electronics/multiface-128-romantic-robot-v87-12-rom-file-for-eprom-programming/
Visit the ProjectSpeccy Tindie store here - https://www.tindie.com/stores/projectspeccy/
Видео Building a Romantic Robot Multiface 128 Clone for ZX Spectrum! канала Mark Fixes Stuff
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Fixing a Sinclair ZX Spectrum 128k +2 Datacorder... and using a Buck Regulator on a Spectrum??Making an EPROM Adapter and Burning Amiga Kickstart ROMs - TL866 MiniProPCB prototyping with UV solder-mask. High precision PCB double-sided. Chips QFN36 and ATMEGA 328P-AURepairing an Atari Jaguar with a Broken Cartridge Slot - RED SCREEN OF DEATH!Fake Chips and Modern C64 Board FixEASY Atari Lynx LCD Screen Upgrade: A No-Solder "Drop-in" LCD Screen install!Fixing a Sega Dreamcast Controller Port Fuse, plus LED Colour Change & Battery ModSinclair Spectrum Multiface 3Building a replacement SRAM memory module for the C64 + Giveaway Winner AnnouncementHow Carbon Nanotubes Will Change the WorldBuilding a 128K ZX Spectrum Clone with an LED KeyboardSBCs in 2021: The State of PlayA once common yet unseen deviceConverting an old PC Floppy Drive to work on a Commodore Amiga!Fixing the Sinclair Spectrum +3: Disk Drive, Audio & RGB SCART! Better Sound & Video!Can You Build A Brand New ZX Spectrum From 100% New Parts?An Apple IIgs motherboard, a VIC-20 with missing parts, some unknown C64 carts and more!Sinclair Vega Plus Handheld - One Week Review - Vega + - RCL - Retro Computers LtdPlus+ Hardcard 20 Failure AnalysisFixing & Servicing a BBC Micro Power Supply after the caps explode!