Testing different Peltier coolers by cooling/freezing water - Part 3/1 - TEC12706
This is another video series, where I try to systematically test the Peltier devices I have.
This is the second experimental part where I test the TEC12706. I try to determine the point where the water reaches 0°C and see how much time it took to get there. By combining the time and amount of pumped heat, I can compare the values to my calculations and see if they are in an agreement or not.
Since this experiment seemed to give strange results, I will repeat it again by checking the cooling and running the experiment again. Hopefully, with better luck and more promising results.
If you found this video useful, please subscribe!
If you want to support my work, please consider buying the parts using my affiliate links:
https://curiousscientist.tech/tools
Видео Testing different Peltier coolers by cooling/freezing water - Part 3/1 - TEC12706 канала Curious Scientist
This is the second experimental part where I test the TEC12706. I try to determine the point where the water reaches 0°C and see how much time it took to get there. By combining the time and amount of pumped heat, I can compare the values to my calculations and see if they are in an agreement or not.
Since this experiment seemed to give strange results, I will repeat it again by checking the cooling and running the experiment again. Hopefully, with better luck and more promising results.
If you found this video useful, please subscribe!
If you want to support my work, please consider buying the parts using my affiliate links:
https://curiousscientist.tech/tools
Видео Testing different Peltier coolers by cooling/freezing water - Part 3/1 - TEC12706 канала Curious Scientist
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![ADS1256 - Analyzing SPI data](https://i.ytimg.com/vi/bGLEmtjpJQo/default.jpg)
![ADS1256 - Reading a single conversion result using RDATA](https://i.ytimg.com/vi/4-A8aJ5BzIs/default.jpg)
![RF 433 Transmitter and Receiver with sensors and OLED displays](https://i.ytimg.com/vi/lGR8yVVkEL0/default.jpg)
![Arduino power meter based on the ACS 712 and the ADS1115](https://i.ytimg.com/vi/wqADfB0Y4ts/default.jpg)
![Building an SZBK07-based thermostat for Peltier cooling](https://i.ytimg.com/vi/KDgb93DnTWY/default.jpg)
![Tensile testing of different specimens](https://i.ytimg.com/vi/hH5aBqoqcBE/default.jpg)
![Testing and comparing different Peltier coolers - Part 4 - TEC12708](https://i.ytimg.com/vi/LElvd5ibFJU/default.jpg)
![Electron Microscopy - Lecture 3 - Tungsten gun](https://i.ytimg.com/vi/4LPkk3l0gkM/default.jpg)
![Solartron 7060 - 6½ digit multimeter](https://i.ytimg.com/vi/Zo06B7IpgqY/default.jpg)
![TCD1304 linear CCD - Part 3 - Assembling my custom PCB](https://i.ytimg.com/vi/HKGaHWrf1cg/default.jpg)
![MINIQ BG6300 milling table with stepper motors and joystick control](https://i.ytimg.com/vi/yJ1zgAqXDHQ/default.jpg)
![ADS1256 board test - Part 1](https://i.ytimg.com/vi/6SW3wcsMRwk/default.jpg)
![Building a Peltier cooler-based cooling box - Second iteration, improvements [Part 5/6]](https://i.ytimg.com/vi/17dzXbIzO_Q/default.jpg)
![Electron Microscopy - Lecture 4 - LaB6 gun](https://i.ytimg.com/vi/A5-fcpS6DlI/default.jpg)
![Testing and demonstrating the best ADS1256 board](https://i.ytimg.com/vi/3Rlr0FCffr0/default.jpg)
![[Short Answers #1] Output voltage of a strain gauge amplifier module](https://i.ytimg.com/vi/gC8Gp1CTxb8/default.jpg)
![Building a coil winder [Part 5] - Coding and math](https://i.ytimg.com/vi/wsTccGiKybM/default.jpg)
![Assembling the dual TEC12710 cooler [Part 4/6]](https://i.ytimg.com/vi/rfbnSMU9vjM/default.jpg)
![Testing and comparing different Peltier coolers - Part 5 - TEC12710](https://i.ytimg.com/vi/trUrsUQDfOU/default.jpg)
![Breaking a 3d-printed specimen with the third iteration](https://i.ytimg.com/vi/izC4JYUHXrs/default.jpg)