Jeep TJ Build - Jeep 30: Driver Side Axle Fun
The jounce bumper (bump stop) and spring coil upper rubber rest were damaged by heat. They were also old and had about as much spring in them as a rock. I ordered new ones on Amazon. This video covers putting them in and then wrestling the axle back under the Jeep. I'm going to go ahead and do the other one while I'm at it. This is technically an upgrade in some ways, and I swore off doing upgrades while I am rebuilding it. However, I don't like putting bad parts back on that will be a pain in the tail later.
Видео Jeep TJ Build - Jeep 30: Driver Side Axle Fun канала Brian Greul
Видео Jeep TJ Build - Jeep 30: Driver Side Axle Fun канала Brian Greul
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Rotary Phase Converter Setup - 10 HP - Wiring and Startup](https://i.ytimg.com/vi/oNjeGuj1-CU/default.jpg)
![Jeep TJ Build - Jeep 54 - Changing the water pump and thermostat](https://i.ytimg.com/vi/vnAlb_XhAbY/default.jpg)
![Jeep TJ Build - Jeep 37: Changing the Power Steering Pump Pulley](https://i.ytimg.com/vi/rEMlzO5vRvE/default.jpg)
![Jeep TJ Build - Jeep 36: Re-attaching the track bar and dealing with the steering wheel alignment](https://i.ytimg.com/vi/knK_HVar9R8/default.jpg)
![Jeep TJ Build - Jeep 35- Steering alignment](https://i.ytimg.com/vi/D2e-8cWTCqU/default.jpg)
![Jeep TJ Build - Jeep 34: Fishhook on the frame - OUCH!](https://i.ytimg.com/vi/hvUA7hdHZeg/default.jpg)
![Jeep TJ Build - Jeep 33 - Securing the brakelines](https://i.ytimg.com/vi/Ft1qW1ky9jw/default.jpg)
![Jeep TJ Build - Jeep 32: Replacing the Front Upper Control Arm Bushings](https://i.ytimg.com/vi/1PHh6Fh8oWc/default.jpg)
![Jeep TJ Build - Jeep 31: Passenger side jounce bumper and spring rest](https://i.ytimg.com/vi/1UoDm-mTE2o/default.jpg)
![Jeep TJ Build - Jeep 29: Fun with the brake line](https://i.ytimg.com/vi/G2MFFE1Lb6c/default.jpg)
![Jeep TJ Build - Jeep 28: Painting the frame with anti-corrosive paint](https://i.ytimg.com/vi/XgBiZCih3wo/default.jpg)
![Adding lights to Truck Cap](https://i.ytimg.com/vi/WAWLKM53CwA/default.jpg)
![Adding a Backup Camera to a NIssan Frontier (2017) with a truck cap](https://i.ytimg.com/vi/xD7gIpn1wHk/default.jpg)
![Changing BOLT lock cylinders on ARE DCU Truck Cap](https://i.ytimg.com/vi/uLZqf3bJm_Y/default.jpg)
![Installing a $99 ladder rack on my used ARE DCU Truck Topper](https://i.ytimg.com/vi/aYsuAA_DHpY/default.jpg)
![Jeep TJ Build - Jeep 26: Track Bar and Shock Tower Work](https://i.ytimg.com/vi/xgLJsSiSW4A/default.jpg)
![Jeep TJ Build - Jeep 25: It's BAAAACK (from the frame shop) and I'm taking it apart](https://i.ytimg.com/vi/dHavfzJeB9w/default.jpg)
![SmallRig W60 Wireless Microphone - Unboxing and Initial Review](https://i.ytimg.com/vi/wTJmVdxQpDc/default.jpg)
![R0DE Wireless Go 2 battery failure](https://i.ytimg.com/vi/OWkiBQw34fU/default.jpg)
![Garage Projects - Temporary Shelf and moving stuff](https://i.ytimg.com/vi/3KRp4_-tTco/default.jpg)